VCI Pro Lite 0702

What it pulls

VCI’s own bench test, one line per prop. Drag across the chart to move the throttle; the model above follows.

What you get for $35.00

• 35 g at full throttle

  On VCI’s 4 V bench the 27000KV pulled 35 g on a GF1219S-3 at 5.15 A; the 30000KV pulled 37.1 g at 5.9 A and the 23000KV 32 g at 3.9 A.

  Source: VCI spec sheet

• 1.4 g

  VCI gives 1.4 g with the cable for the 23000KV and 27000KV, and 1.38 g for the 30000KV.

  Source: VCI spec sheet

What to pair it with

Our reading of VCI’s numbers, so your build matches what the motor was tested with.

ESC

VCI’s peak currents are 3.9 A (23000KV), 5.15 A (27000KV) and 5.9 A (30000KV) at 4 V. (VCI spec sheet)

Props

VCI tested every KV on a GF1219S-3. (VCI spec sheet)

Battery

1S; VCI rates it at 1S (4 V). (VCI spec sheet)

Frame

Three M1.4 screws on a 6.6 mm circle. (VCI drawing)

Where to buy

• VCI Hobbythe maker’s store; set of 4, any KV
  $35.00seen Oct 19, 2026
  Visit
• GetFPV27000KV, set of 4
  price on the store’s page
  Visit

Plain links, not affiliate links. Prices change; the store’s page has the current one.

Full specs

Bench data

Redrawn from VCI’s test reports. Thrust is static pull on a bench, more than you get in flight. Power is volts × amps; efficiency is thrust divided by power.

Inside the motor

A brushless outrunner: the coils stand still in the middle and the magnets spin around them. From the top down:

• Magnets. 52SH arc magnets. (VCI spec sheet)

How fast it spins

KV is the motor’s no-load speed per volt. With nothing on the shaft, the 27000KV version reaches about these speeds; a prop loads the motor and brings it down, typically to around 70–75% of these figures at full throttle.

A 12-pole rotor has 6 pole pairs, so every turn of the shaft is 6 electrical cycles, and a six-step ESC switches the phases 36 times per turn.

About the 3D model

A generic outrunner drawn from VCI’s published sizes: the 7 × 2 mm stator, 9 mm bell, 8 mm height, 1 mm shaft, 6.6 mm mounting circle and 9 teeth and 12 magnets. Anything VCI doesn’t publish is typical for a motor this size, and the bell’s spoked top, the base and the inside are a generic design, not this motor’s. The colours are read off the maker’s product photos. There are no logos or markings: it is our drawing, not the maker’s.

Sources

1. VCI Hobby: VCI 0702 PRO LITE Motor 23000KV/27000KV/30000KV, 4 pcs (product page). Retrieved Oct 19, 2026.
2. VCI Hobby: 0702 PRO Lite drawing (image on the product page’s Specifications tab). Retrieved Oct 19, 2026.
3. VCI Hobby: 0702 PRO Lite spec sheets and testing data for the 23000KV, 27000KV and 30000KV, at 4 V on a GF1219S-3 (image on the product page’s Specifications tab). VCI’s temperature is the shaft’s after a run from 0 to 100% throttle; its voltage column, 4 V on every row, is left out.. Retrieved Oct 19, 2026.
4. VCI Hobby: 0702 PRO Lite product photo, side view (first gallery image). Retrieved Oct 19, 2026.
5. VCI Hobby: 0702 PRO Lite product photo, top view (gallery on the product page). Retrieved Oct 19, 2026.