T-Motor Pacer P2207 V3

What it pulls

T-Motor’s own bench test, one line per prop. Drag across the chart to move the throttle; the model above follows.

What you get for $19.90

• Four windings

  1750KV, 1950KV and 2080KV for 6S, 2550KV for 4S. With the P2306 V3, T-Motor sells the Pacer V3 in seven KVs.

  Source: T-Motor drawing, specs and test report, T-Motor product page

• N52 arc magnets

  T-Motor uses N52 arc magnets and says they give strong, stable output.

  Source: T-Motor product page

• Hollowed-out one-piece bell

  A Unibell with an open top; T-Motor says it strengthened the parts of the rotor that carry the load.

  Source: T-Hobby product page, T-Motor product page

• Bench data for every KV

  Thrust, current, RPM and power for each KV on T-Motor's P49436-3 and T5143S-3; at full throttle on 6S the 1950KV pulled 1760 g and 1815 g.

  Source: T-Motor drawing, specs and test report

What to pair it with

Our reading of T-Motor’s numbers, so your build matches what the motor was tested with.

ESC

Peak current over 60 s is 44 A for the 1950KV and 2080KV, 38.4 A for the 1750KV and 43.6 A for the 2550KV. T-Hobby pairs it with T-Motor's V50A 4-in-1. (T-Motor drawing, specs and test report, T-Hobby product page)

Props

T-Hobby lists T-Motor's P49436. On the 6S bench the 1950KV pulled 1760 g on the P49436-3 and 1815 g on the T5143S-3 at full throttle. (T-Hobby product page, T-Motor drawing, specs and test report)

Battery

6S for the 1750KV, 1950KV and 2080KV; 4S for the 2550KV. T-Hobby suggests a 6S 1300 mAh or 4S 1550 mAh 120C pack, for a take-off weight of about 700–720 g. (T-Motor drawing, specs and test report, T-Hobby product page)

Frame

5-inch quads, per T-Hobby. Four M3 holes, opposite holes 16 mm apart. (T-Hobby product page, T-Motor drawing, specs and test report)

Where to buy

• T-Motorthe maker's store (Tmotorhobby); same price for every KV
  $23.90seen Oct 19, 2026
  Visit
• T-HobbyT-Motor's hobby-brand store; price shown for 1750KV
  $19.90seen Oct 19, 2026
  Visit

Plain links, not affiliate links. Prices change; the store’s page has the current one.

Full specs

Bench data

Redrawn from T-Motor’s test reports. Thrust is static pull on a bench, more than you get in flight. Power is volts × amps; efficiency is thrust divided by power.

Inside the motor

A brushless outrunner: the coils stand still in the middle and the magnets spin around them. From the top down:

• Bell. One piece (Unibell), 28.1 mm across; silver, with an open top whose spoke edges are anodised light blue. (T-Hobby product page, T-Motor drawing, specs and test report, T-Motor product page)
• Shaft. 5 mm where it leaves the bell and 4 mm inside the bearings, with 7 mm of M5 thread; it stands 12 mm above the bell. (T-Motor drawing, specs and test report)
• Magnets. N52 arc magnets forming 14 poles round a 12-slot stator. (T-Motor product page, T-Motor drawing, specs and test report)
• Base. Four M3 holes, opposite holes 16 mm apart; 20 AWG leads, 150 mm long. (T-Motor drawing, specs and test report)

How fast it spins

KV is the motor’s no-load speed per volt. With nothing on the shaft, the 1950KV version reaches about these speeds; a prop loads the motor and brings it down, typically to around 70–75% of these figures at full throttle.

A 14-pole rotor has 7 pole pairs, so every turn of the shaft is 7 electrical cycles, and a six-step ESC switches the phases 42 times per turn.

About the 3D model

A generic outrunner drawn from T-Motor’s published sizes: the 22 × 7 mm stator, 28.1 mm bell, 19 mm height, 5 mm shaft, 16 mm mounting circle and 12 teeth and 14 magnets. Anything T-Motor doesn’t publish is typical for a motor this size, and the bell’s spoked top, the base and the inside are a generic design, not this motor’s. The colours are read off the maker’s product photos. There are no logos or markings: it is our drawing, not the maker’s.

Sources

1. T-Motor: P2207 V3 product page on its Tmotorhobby store (feature images, product photos, price; drawing, spec table, test report and contents are images on the page). Retrieved Oct 19, 2026.
2. T-Motor: P2207 V3 product drawing, spec table for all four KVs and test report, five images on the product page (S1) starting with this one (the report continues on the next two, then thrust graphs and contents). Columns as T-Motor gives them: voltage measured per row, current, RPM, thrust in g, power, efficiency. Retrieved Oct 19, 2026.
3. T-Hobby (T-Motor's hobby brand): Pacer V3 P2207 product page (description, recommended setup, price). Retrieved Oct 19, 2026.