3–3.5-inch FPV motor
T-Motor F1404
A 9.34 g micro motor for 2.5–4-inch builds, in three windings: 3800KV for 3-inch long range, 4600KV for spec racing, and 2900KV rated up to 6S.
- 3-inch long range and light builds
- 2.5–4-inch toothpicks
- 3S–4S (3800KV, 4600KV) or 4S–6S (2900KV)
The spin is an illustration: the model turns at 1/600 of the no-load speed, and it is a generic 1404 motor drawn from T-Motor’s published sizes, not its exact design. Thrust, current and power are T-Motor’s bench figures for the GF3016 prop at 16 V, read straight across between its throttle steps. Its data starts at 50% throttle.
- Max thrust
- 325 g
- GF3016 prop, 16 V
- Weight
- 9.34 g
- with leads; 7.75 g without
- Peak current
- 16.2 A
- full throttle
- Max power
- 255 W
- full throttle
from $14.90a motor at T-Motor
A set of four: $59.60
Price seen Oct 19, 2026. Plain links: we earn nothing from them.
What it pulls
T-Motor’s own bench test, one line per prop. Drag across the chart to move the throttle; the model above follows.
At 60% with the GF3016: 207 g of thrust, 6.5 A, 104 W, 1.98 g per watt.
On your quad
2.0 : 1
Thrust to weight at full throttle: four motors pull 1,298 g with the GF3016 at 16 V.
At 60% throttle they pull 826 g, 1.3 times the quad’s weight.
All-up weight is the quad ready to fly, with its battery and camera. The thrust is the maker’s static bench figure; in the air it is lower.
What you get for $14.90
Light
7.75 g without its leads, 9.34 g with them.
Source: T-Motor product page
Three windings
3800KV for 3-inch long range, 4600KV for spec racing, and 2900KV rated for 4S–6S.
Source: T-Motor product page
Full bench data
T-Motor's test report gives thrust, current, RPM, power and motor temperature in 5% throttle steps for 3- to 4-inch props.
Source: T-Motor test report
What to pair it with
Our reading of T-Motor’s numbers, so your build matches what the motor was tested with.
- ESC
- Peak current over 60 s is 10.45 A for the 2900KV, 19 A for the 3800KV and 20 A for the 4600KV, so an ESC rated for 20 A or more per motor covers all three. T-Hobby suggests a 4–6S ESC. (T-Motor product page, T-Hobby product page)
- Props
- T-Motor benched all three KVs on 3-inch props (GF3016, GF3028-3, HQ3*3*3), and the 2900KV also on 3.5- and 4-inch props (HQ3520-3, GF4023-3, GF4024-2). T-Hobby lists 3–4-inch props. (T-Motor test report, T-Hobby product page)
- Battery
- 3S–4S for the 3800KV and 4600KV, 4S–6S for the 2900KV. T-Hobby suggests a 4S 850 mAh or 6S 550 mAh 75C pack. (T-Motor product page, T-Hobby product page)
- Frame
- 2.5–4-inch toothpick frames, per T-Hobby. The base takes four M2 screws on a 9 mm circle. (T-Hobby product page, T-Motor drawing)
Where to buy
- T-Motorthe maker's store (Tmotorhobby)$14.90seen Oct 19, 2026Visit
- T-HobbyT-Motor's hobby-brand store$14.90seen Oct 19, 2026Visit
- RaceDayQuads3800KVprice on the store’s pageVisit
- RaceDayQuads4600KVprice on the store’s pageVisit
- Pyrodrone3800KVprice on the store’s pageVisit
- Pyrodrone2900KVprice on the store’s pageVisit
Plain links, not affiliate links. Prices change; the store’s page has the current one.
Full specs
| Spec | Value | Source |
|---|---|---|
| KV | 3,800 rpm/V (also 2900KV and 4600KV) | T-Motor product page |
| Stator | 14 × 4 mm (1404) | T-Motor product page |
| Configuration | 9N12P (9 stator slots, 12 magnet poles) | T-Motor product page |
| Battery | 3S–4S LiPo (2900KV: 4S–6S) | T-Motor product page |
| Weight | 9.34 g (with leads; 7.75 g without) | T-Motor product page |
| Dimensions | Φ17.9 × 16.6 mm (16.6 mm is the full length, shaft included) | T-Motor drawing |
| Shaft | 1.5 mm, protrudes 3 mm (T-Hobby's page also says 1.5 mm; the spec tables on the Tmotorhobby page say 2 mm) | T-Motor drawing |
| Mounting | 4 × M2 holes on a 9 mm circle | T-Motor drawing |
| Internal resistance | 195 mΩ (310 mΩ for 2900KV, 138 mΩ for 4600KV) | T-Motor product page |
| Idle current | 0.5 A (at 10 V; 0.4 A for 2900KV, 0.6 A for 4600KV) | T-Motor product page |
| Peak current | 19 A (for 60 s; 10.45 A for 2900KV, 20 A for 4600KV) | T-Motor product page |
| Max power | 304 W (for 60 s; 262 W for 2900KV, 316 W for 4600KV) | T-Motor product page |
| Leads | 24 AWG, 150 mm | T-Motor product page |
| In the box | 1 × motor, 1 × parts bag | T-Motor product page |
Bench data
Redrawn from T-Motor’s test reports. Thrust is static pull on a bench, more than you get in flight. Power is volts × amps; efficiency is thrust divided by power.
2900KV on 4S–6S7 props
| Prop | Throttle | Thrust (g) | Voltage (V) | Current (A) | RPM | Power (W) | Efficiency (g/W) |
|---|---|---|---|---|---|---|---|
| GF3028-3 (Gemfan 3 × 2.8, 3-blade)at 25.2 Vmotor at 68 °C | 50% | 183.71 | 25.2 | 2.51 | 25035 | 63.25 | 2.9 |
| 55% | 210.96 | 25.19 | 3.09 | 26682 | 77.84 | 2.71 | |
| 60% | 239.65 | 25.18 | 3.7 | 28369 | 93.17 | 2.57 | |
| 65% | 268.22 | 25.17 | 4.37 | 30036 | 109.99 | 2.44 | |
| 70% | 301.44 | 25.17 | 5.05 | 31788 | 127.11 | 2.37 | |
| 75% | 333.89 | 25.16 | 5.81 | 33425 | 146.18 | 2.28 | |
| 80% | 368.79 | 25.15 | 6.57 | 35044 | 165.24 | 2.23 | |
| 85% | 406.59 | 25.14 | 7.6 | 36664 | 191.06 | 2.13 | |
| 90% | 436.56 | 25.13 | 8.59 | 37964 | 215.87 | 2.02 | |
| 95% | 462.43 | 25.12 | 9.57 | 39075 | 240.4 | 1.92 | |
| 100% | 480.22 | 25.1 | 10.44 | 39783 | 262.04 | 1.83 | |
| HQ3520-3 (HQProp 3.5 × 2.0, 3-blade)at 21 Vmotor at 64 °C | 50% | 185.74 | 21.02 | 2.67 | 19884 | 56.12 | 3.31 |
| 55% | 214.21 | 21.02 | 3.29 | 21321 | 69.16 | 3.1 | |
| 60% | 243.77 | 21.01 | 4 | 22568 | 84.04 | 2.9 | |
| 65% | 274.35 | 21 | 4.76 | 23722 | 99.96 | 2.74 | |
| 70% | 301.01 | 20.99 | 5.55 | 24855 | 116.49 | 2.58 | |
| 75% | 322.66 | 20.98 | 6.35 | 25777 | 133.22 | 2.42 | |
| 80% | 345.46 | 20.97 | 7.14 | 26619 | 149.73 | 2.31 | |
| 85% | 368.79 | 20.96 | 7.96 | 27383 | 166.84 | 2.21 | |
| 90% | 388.26 | 20.95 | 8.81 | 28160 | 184.57 | 2.1 | |
| 95% | 408.37 | 20.94 | 9.72 | 28698 | 203.54 | 2.01 | |
| 100% | 421.77 | 20.93 | 10.57 | 29036 | 221.23 | 1.91 | |
| GF3028-3 (Gemfan 3 × 2.8, 3-blade)at 21 Vmotor at 60 °C | 50% | 153.69 | 21.05 | 2.01 | 22275 | 42.31 | 3.63 |
| 55% | 180.08 | 21.04 | 2.45 | 24011 | 51.55 | 3.49 | |
| 60% | 207.63 | 21.04 | 3.01 | 25597 | 63.33 | 3.28 | |
| 65% | 226.24 | 21.03 | 3.47 | 27086 | 72.97 | 3.1 | |
| 70% | 250.98 | 21.02 | 4.06 | 28470 | 85.34 | 2.94 | |
| 75% | 276.05 | 21.02 | 4.67 | 29959 | 98.16 | 2.81 | |
| 80% | 305.71 | 21.01 | 5.34 | 31475 | 112.19 | 2.72 | |
| 85% | 334.99 | 21 | 6.08 | 32893 | 127.68 | 2.62 | |
| 90% | 363.73 | 20.99 | 6.89 | 34244 | 144.62 | 2.52 | |
| 95% | 386.68 | 20.98 | 7.72 | 35483 | 161.97 | 2.39 | |
| 100% | 413.56 | 20.97 | 8.59 | 36383 | 180.13 | 2.3 | |
| GF4024-2 (Gemfan 4 × 2.4, 2-blade)at 16.8 Vmotor at 58 °C | 50% | 158.42 | 16.82 | 2.25 | 16242 | 37.85 | 4.19 |
| 55% | 184.12 | 16.82 | 2.78 | 17406 | 46.76 | 3.94 | |
| 60% | 210.68 | 16.81 | 3.38 | 18446 | 56.82 | 3.71 | |
| 65% | 236.43 | 16.81 | 4.01 | 19488 | 67.41 | 3.51 | |
| 70% | 262.59 | 16.8 | 4.71 | 20469 | 79.13 | 3.32 | |
| 75% | 289.41 | 16.79 | 5.48 | 21363 | 92.01 | 3.15 | |
| 80% | 313.81 | 16.78 | 6.24 | 22153 | 104.71 | 3 | |
| 85% | 336.89 | 16.77 | 7.06 | 22867 | 118.4 | 2.85 | |
| 90% | 357.9 | 16.75 | 7.9 | 23547 | 132.33 | 2.7 | |
| 95% | 377.11 | 16.74 | 8.7 | 24098 | 145.64 | 2.59 | |
| 100% | 393.15 | 16.74 | 9.53 | 24573 | 159.53 | 2.46 | |
| GF4023-3 (Gemfan 4 × 2.3, 3-blade)at 16.8 Vmotor at 56 °C | 50% | 170.51 | 16.78 | 2.57 | 15090 | 43.12 | 3.95 |
| 55% | 194.68 | 16.77 | 3.16 | 16226 | 52.99 | 3.67 | |
| 60% | 217.53 | 16.76 | 3.81 | 17046 | 63.86 | 3.41 | |
| 65% | 239.54 | 16.76 | 4.49 | 17831 | 75.25 | 3.18 | |
| 70% | 260.85 | 16.75 | 5.19 | 18686 | 86.93 | 3 | |
| 75% | 282.41 | 16.74 | 5.93 | 19409 | 99.27 | 2.84 | |
| 80% | 304.33 | 16.73 | 6.71 | 19992 | 112.26 | 2.71 | |
| 85% | 321.46 | 16.72 | 7.5 | 20606 | 125.4 | 2.56 | |
| 90% | 337.24 | 16.71 | 8.3 | 21052 | 138.69 | 2.43 | |
| 95% | 350.34 | 16.7 | 9.13 | 21450 | 152.47 | 2.3 | |
| 100% | 361.95 | 16.7 | 9.9 | 21765 | 165.33 | 2.19 | |
| HQ3520-3 (HQProp 3.5 × 2.0, 3-blade)at 16.8 Vmotor at 52 °C | 50% | 137.2 | 16.77 | 1.96 | 16954 | 32.87 | 4.17 |
| 55% | 158.88 | 16.77 | 2.42 | 18273 | 40.58 | 3.91 | |
| 60% | 181.41 | 16.76 | 2.92 | 19408 | 48.94 | 3.71 | |
| 65% | 201.38 | 16.76 | 3.45 | 20554 | 57.82 | 3.48 | |
| 70% | 225.94 | 16.75 | 4.1 | 21611 | 68.68 | 3.29 | |
| 75% | 250.33 | 16.74 | 4.76 | 22663 | 79.68 | 3.14 | |
| 80% | 272.03 | 16.73 | 5.48 | 23645 | 91.68 | 2.97 | |
| 85% | 291.77 | 16.72 | 6.18 | 24486 | 103.33 | 2.82 | |
| 90% | 310.66 | 16.72 | 6.9 | 25303 | 115.37 | 2.69 | |
| 95% | 332.24 | 16.7 | 7.71 | 26102 | 128.76 | 2.58 | |
| 100% | 350.22 | 16.69 | 8.49 | 26739 | 141.7 | 2.47 | |
| GF3028-3 (Gemfan 3 × 2.8, 3-blade)at 16.8 Vmotor at 49.5 °C | 50% | 101.14 | 16.79 | 1.49 | 18626 | 25.02 | 4.04 |
| 55% | 116.37 | 16.78 | 1.81 | 20037 | 30.37 | 3.83 | |
| 60% | 133.92 | 16.78 | 2.16 | 21386 | 36.24 | 3.69 | |
| 65% | 152.76 | 16.78 | 2.55 | 22764 | 42.79 | 3.57 | |
| 70% | 170.61 | 16.78 | 3 | 24257 | 50.34 | 3.39 | |
| 75% | 188.96 | 16.77 | 3.45 | 25447 | 57.86 | 3.27 | |
| 80% | 209.26 | 16.76 | 3.93 | 26608 | 65.87 | 3.18 | |
| 85% | 230.6 | 16.76 | 4.49 | 27892 | 75.25 | 3.06 | |
| 90% | 253.06 | 16.75 | 5.1 | 29113 | 85.43 | 2.96 | |
| 95% | 276.26 | 16.74 | 5.78 | 30312 | 96.76 | 2.86 | |
| 100% | 294.98 | 16.73 | 6.38 | 31327 | 106.74 | 2.76 |
Source: T-Hobby product page
3800KV on 3S–4S, 16 V2 props
| Prop | Throttle | Thrust (g) | Voltage (V) | Current (A) | RPM | Power (W) | Efficiency (g/W) |
|---|---|---|---|---|---|---|---|
| GF3016 (Gemfan 3 × 1.6)motor at 48 °C | 50% | 158.01 | 15.96 | 4.28 | 22759 | 68.24 | 2.32 |
| 55% | 184.56 | 15.95 | 5.37 | 24844 | 85.71 | 2.15 | |
| 60% | 206.52 | 15.94 | 6.54 | 26555 | 104.25 | 1.98 | |
| 65% | 229.16 | 15.92 | 7.73 | 28392 | 123.02 | 1.86 | |
| 70% | 245.54 | 15.9 | 8.91 | 29967 | 141.76 | 1.73 | |
| 75% | 263.84 | 15.88 | 10.14 | 31502 | 160.99 | 1.64 | |
| 80% | 275.66 | 15.87 | 11.2 | 32843 | 177.78 | 1.55 | |
| 85% | 290.17 | 15.84 | 12.31 | 34148 | 195 | 1.49 | |
| 90% | 304.36 | 15.82 | 13.49 | 35355 | 213.38 | 1.43 | |
| 95% | 315.45 | 15.79 | 14.74 | 36507 | 232.84 | 1.35 | |
| 100% | 324.52 | 15.76 | 16.19 | 37705 | 255.08 | 1.27 | |
| HQ3*3*3 (HQProp 3 × 3, 3-blade)motor at 45 °C | 50% | 187.04 | 15.95 | 5.92 | 19767 | 94.41 | 1.98 |
| 55% | 214.5 | 15.92 | 7.45 | 21382 | 118.65 | 1.81 | |
| 60% | 232.18 | 15.9 | 8.71 | 22438 | 138.53 | 1.68 | |
| 65% | 248.93 | 15.88 | 9.74 | 23265 | 154.64 | 1.61 | |
| 70% | 259.14 | 15.87 | 10.98 | 23950 | 174.18 | 1.49 | |
| 75% | 269.46 | 15.84 | 12.28 | 24750 | 194.64 | 1.38 | |
| 80% | 278.38 | 15.82 | 13.86 | 25735 | 219.19 | 1.27 | |
| 85% | 282.22 | 15.79 | 15.12 | 26322 | 238.79 | 1.18 | |
| 90% | 291.97 | 15.76 | 16.49 | 26994 | 259.98 | 1.12 | |
| 95% | 294.61 | 15.73 | 17.67 | 27103 | 277.87 | 1.06 | |
| 100% | 301.03 | 15.7 | 19.4 | 27887 | 304.72 | 0.99 |
Source: T-Hobby product page
4600KV on 3S–4S, 16 V2 props
| Prop | Throttle | Thrust (g) | Voltage (V) | Current (A) | RPM | Power (W) | Efficiency (g/W) |
|---|---|---|---|---|---|---|---|
| GF3016 (Gemfan 3 × 1.6)motor at 50 °C | 50% | 184.21 | 15.93 | 5.23 | 26532 | 83.28 | 2.21 |
| 55% | 210.22 | 15.91 | 6.37 | 28299 | 101.26 | 2.08 | |
| 60% | 233.36 | 15.88 | 7.64 | 30006 | 121.4 | 1.92 | |
| 65% | 254.72 | 15.85 | 8.85 | 31559 | 140.28 | 1.82 | |
| 70% | 268.5 | 15.84 | 10.01 | 32770 | 158.49 | 1.69 | |
| 75% | 287.6 | 15.81 | 11.32 | 34340 | 178.95 | 1.61 | |
| 80% | 300.59 | 15.78 | 12.5 | 35813 | 197.32 | 1.52 | |
| 85% | 316.02 | 15.75 | 13.7 | 37190 | 215.83 | 1.46 | |
| 90% | 330.89 | 15.71 | 14.98 | 38436 | 235.41 | 1.41 | |
| 95% | 340.24 | 15.68 | 16.24 | 39376 | 254.54 | 1.34 | |
| 100% | 344.73 | 15.64 | 17.54 | 40053 | 274.32 | 1.26 | |
| HQ3*3*3 (HQProp 3 × 3, 3-blade)motor at 45 °C | 50% | 207.43 | 15.93 | 6.79 | 21921 | 108.07 | 1.92 |
| 55% | 233.33 | 15.91 | 8.32 | 23260 | 132.39 | 1.76 | |
| 60% | 248.36 | 15.88 | 9.53 | 24001 | 151.37 | 1.64 | |
| 65% | 265.25 | 15.85 | 10.59 | 24791 | 167.85 | 1.58 | |
| 70% | 277.23 | 15.84 | 11.96 | 25622 | 189.36 | 1.46 | |
| 75% | 284.98 | 15.81 | 13.2 | 26175 | 208.75 | 1.37 | |
| 80% | 288.18 | 15.78 | 14.55 | 26641 | 229.65 | 1.25 | |
| 85% | 292.27 | 15.75 | 15.87 | 27260 | 249.92 | 1.17 | |
| 90% | 302.37 | 15.71 | 17.29 | 27956 | 271.6 | 1.11 | |
| 95% | 307.61 | 15.68 | 18.65 | 28299 | 292.41 | 1.05 | |
| 100% | 310.57 | 15.64 | 20.23 | 28771 | 316.25 | 0.98 |
Source: T-Hobby product page
Inside the motor
A brushless outrunner: the coils stand still in the middle and the magnets spin around them. From the top down:
- Stator. 14 mm across and 4 mm tall, 9 slots, under a 12-pole magnet ring (9N12P). (T-Motor product page)
- Shaft. 1.5 mm, standing 3 mm above the bell; the motor is 16.6 mm long overall. (T-Motor drawing)
- Bell. 17.9 mm across, with three open windows in the top and four M2 holes on a 5 mm circle round the shaft. (T-Motor drawing)
- Base. A four-armed base with M2 holes on a 9 mm circle; the three phases leave as 24 AWG leads, 150 mm long. (T-Motor product page)
How fast it spins
KV is the motor’s no-load speed per volt. With nothing on the shaft, the 3800KV version reaches about these speeds; a prop loads the motor and brings it down, typically to around 70–75% of these figures at full throttle.
| Battery | Volts | No-load rpm (KV × V) | Electrical frequency | ESC steps per second |
|---|---|---|---|---|
| 4S nominal | 14.8 | 56,240 | 5,624 Hz | 33,744 |
| 4S full | 16.8 | 63,840 | 6,384 Hz | 38,304 |
| 6S nominal | 22.2 | 84,360 | 8,436 Hz | 50,616 |
| 6S full | 25.2 | 95,760 | 9,576 Hz | 57,456 |
A 12-pole rotor has 6 pole pairs, so every turn of the shaft is 6 electrical cycles, and a six-step ESC switches the phases 36 times per turn.
About the 3D model
A generic outrunner drawn from T-Motor’s published sizes: the 14 × 4 mm stator, 17.9 mm bell, 1.5 mm shaft, 9 mm mounting circle and 9 teeth and 12 magnets. Anything T-Motor doesn’t publish is typical for a motor this size, and the bell’s spoked top, the base and the inside are a generic design, not this motor’s. The colours are read off the maker’s product photos. There are no logos or markings: it is our drawing, not the maker’s.
Sources
- T-Motor: F1404 product page on its Tmotorhobby store (spec table per KV, product drawing, test report and contents are images on the page). Retrieved Oct 19, 2026.
- T-Hobby (T-Motor's hobby brand): F1404 product page (specifications as text, recommended setup). Retrieved Oct 19, 2026.
- T-Motor: F1404 test report, seven images on the product page (S1) starting with this one. Thrust in g, voltage measured per row, motor surface temperature after 1 min at 100% throttle; ambient 24 °C for the 2900KV, 8 °C for the 3800KV and 4600KV. Retrieved Oct 19, 2026.
- T-Motor: F1404 product drawing and 2900KV spec table (image on the product page, S1). Retrieved Oct 19, 2026.