Drone Motors

FPV freestyle motor

NewBeeDrone FLOW 2306.5 V2

A 33.6 g 2306.5 freestyle motor with N55H magnets, a TC4 titanium shaft and NSK/NMB 684ZZ bearings, in 1850KV and 2450KV.

  • Freestyle and racing quads
  • 1850KV or 2450KV
  • M5 props
Drawing the 3D model…

The spin is an illustration: the model turns at 1/600 of the no-load speed, and it is a generic 2306.5 motor drawn from NewBeeDrone’s published sizes, not its exact design. No-load speed is KV × 22.2 V, a nominal pack for this version. NewBeeDrone publishes no bench data for it.

Version

For freestyle and racing, NewBeeDrone says. No battery rating or bench data published.

Weight
33.6 g
with wire

from $24.99a motor at NewBeeDrone

A set of four: $99.96

Price seen Oct 19, 2026. Plain links: we earn nothing from them.

What you get for $24.99

  • N55H magnets

    N55H magnets around a stator stacked from 0.15 mm silicon steel sheets.

    Source: NewBeeDrone 1850KV page

  • Titanium shaft

    A TC4 titanium alloy shaft running in NSK or NMB 684ZZ ball bearings.

    Source: NewBeeDrone 1850KV page

  • Second version

    NewBeeDrone says the V2 is built to take crashes better while staying light.

    Source: NewBeeDrone 2450KV page

What to pair it with

Our reading of NewBeeDrone’s numbers, so your build matches what the motor was tested with.

Props
NewBeeDrone lists it with M5 prop mounts; it publishes no prop or bench data for it. (NewBeeDrone 1850KV page)

Where to buy

  • NewBeeDronethe maker's store; 1850KV, 1 motor ($89.99 for 4); sold out when checked
    $24.99seen Oct 19, 2026
    Visit
  • NewBeeDronethe maker's store; 2450KV, 1 motor ($89.99 for 4)
    $24.99seen Oct 19, 2026
    Visit

Plain links, not affiliate links. Prices change; the store’s page has the current one.

Full specs

SpecValueSource
KV1,850 rpm/V (also 2450KV)NewBeeDrone 1850KV page
Stator23 × 6.5 mm (2306.5), 0.15 mm silicon steel sheets (size from NewBeeDrone's name)NewBeeDrone 1850KV page
Weight33.6 g (with wire)NewBeeDrone 1850KV page
ShaftTC4 titanium alloy; M5 prop mount (M5 from NewBeeDrone's store listing (prop mount filter))NewBeeDrone 1850KV page, NewBeeDrone 2450KV page
MagnetsN55HNewBeeDrone 1850KV page
BearingsNSK / NMB 684ZZ ball bearingsNewBeeDrone 1850KV page
Leads20 AWG siliconeNewBeeDrone 1850KV page
In the box1 motor and 5 screws (as pictured on NewBeeDrone's package photo, which also shows one round part, a nut or washer; also sold in packs of 4)NewBeeDrone product photos

Inside the motor

A brushless outrunner: the coils stand still in the middle and the magnets spin around them. From the top down:

How fast it spins

KV is the motor’s no-load speed per volt. With nothing on the shaft, the 1850KV version reaches about these speeds; a prop loads the motor and brings it down, typically to around 70–75% of these figures at full throttle.

BatteryVoltsNo-load rpm (KV × V)Electrical frequencyESC steps per second
4S nominal14.827,3803,194 Hz19,166
4S full16.831,0803,626 Hz21,756
6S nominal22.241,0704,792 Hz28,749
6S full25.246,6205,439 Hz32,634

A 14-pole rotor has 7 pole pairs, so every turn of the shaft is 7 electrical cycles, and a six-step ESC switches the phases 42 times per turn.

About the 3D model

A generic outrunner drawn from NewBeeDrone’s published sizes: the 23 × 6.5 mm stator. Anything NewBeeDrone doesn’t publish is typical for a motor this size, and the bell’s spoked top, the base and the inside are a generic design, not this motor’s. The colours are read off the maker’s product photos. There are no logos or markings: it is our drawing, not the maker’s.

Sources

  1. NewBeeDrone: FLOW 2306.5 V2 Freestyle FPV Motor - 1850KV (product page on NewBeeDrone's own store). Retrieved Oct 19, 2026.
  2. NewBeeDrone: FLOW 2306.5 V2 Freestyle FPV Motor - 2450KV (product page on NewBeeDrone's own store; the same spec list without the 7075 line). Retrieved Oct 19, 2026.
  3. NewBeeDrone: FLOW 2306.5 V2 product photos (side, top and bottom views, box contents), used for finish and spoke count. Retrieved Oct 19, 2026.