Whoop motor
NewBeeDrone FLOW 0804 Dual Ball-Bearing
An 0804 whoop motor with two 681XZZ ball bearings and a 1 mm double step shaft, 2.85 g without wire, in 14000KV (2S), 19000KV and 25000KV.
- Whoops such as NewBeeDrone's Cockroach75, Mosquito and MosquitoXL
- 40 mm Azi or Gemfan 65mmS props
- JST 1.0 or JST 1.25 motor plugs
The spin is an illustration: the model turns at 1/600 of the no-load speed, and it is a generic 0804 motor drawn from NewBeeDrone’s published sizes, not its exact design. No-load speed is KV × 7.4 V, a nominal pack for this version. NewBeeDrone publishes no bench data for it.
- Weight
- 2.85 g
- each, without wire and plug
Plain links: we earn nothing from them.
What you get
Two ball bearings
Two 681XZZ ball bearings in an 08-size motor, which NewBeeDrone says makes it smoother and more efficient.
Source: NewBeeDrone feature images
Three KVs
14000KV designed for 2S, 19000KV for efficiency and balance, 25000KV for racing.
Source: NewBeeDrone product page
7075 aluminium
NewBeeDrone makes it from 7075 aluminium alloy.
Source: NewBeeDrone product page, NewBeeDrone feature images
Cooling
NewBeeDrone says the rotor is shaped to push air downward to cool the motor.
Source: NewBeeDrone feature images
What to pair it with
Our reading of NewBeeDrone’s numbers, so your build matches what the motor was tested with.
- Frame
- NewBeeDrone recommends its Cockroach75, Mosquito and MosquitoXL frames. (NewBeeDrone product page)
- Props
- NewBeeDrone recommends its 40 mm Azi three-blade or the Gemfan 65mmS two-blade. (NewBeeDrone product page)
- Battery
- 2S for the 14000KV; NewBeeDrone points to packs such as its Nitro Nectar Gold. (NewBeeDrone product page)
- Flight controller
- JST 1.0 plugs come fitted, with spare JST 1.25 leads for other boards. (NewBeeDrone product page)
Where to buy
- NewBeeDronethe maker's store; set of 4, same price for each KV (14000KV and 19000KV sold out when checked)$45.99seen Oct 19, 2026Visit
Plain links, not affiliate links. Prices change; the store’s page has the current one.
Full specs
| Spec | Value | Source |
|---|---|---|
| KV | 19,000 rpm/V (also 14000KV and 25000KV) | NewBeeDrone product page |
| Stator | 8 × 4 mm (0804) (size from NewBeeDrone's name) | NewBeeDrone product page |
| Battery | 2S LiPo for the 14000KV (NewBeeDrone gives no battery rating for the 19000KV and 25000KV) | NewBeeDrone product page |
| Weight | 2.85 g (each, without wire and plug) | NewBeeDrone product page |
| Shaft | 1 mm double step shaft | NewBeeDrone product page |
| Bearings | Two 681XZZ ball bearings | NewBeeDrone feature images |
| Leads | 50 mm with a JST 1.0 plug fitted; solder pads on the motor | NewBeeDrone product page |
| In the box | 4 motors with JST 1.0 plugs, 4 spare JST 1.25 plug leads (50 mm), screws | NewBeeDrone product page, NewBeeDrone product photos |
Inside the motor
A brushless outrunner: the coils stand still in the middle and the magnets spin around them. From the top down:
- Bell. NewBeeDrone lists 7075 aluminium alloy. Dark grey, with six spokes on the top. (NewBeeDrone product page, NewBeeDrone product photos)
- Bearings. Two 681XZZ ball bearings. (NewBeeDrone feature images)
- Shaft. 1 mm double step shaft. (NewBeeDrone product page)
- Base. A three-arm base with three screw holes. (NewBeeDrone feature images, NewBeeDrone product photos)
- Leads. 50 mm leads with a JST 1.0 plug, soldered to pads on the motor. (NewBeeDrone product page)
How fast it spins
KV is the motor’s no-load speed per volt. With nothing on the shaft, the 19000KV version reaches about these speeds; a prop loads the motor and brings it down, typically to around 70–75% of these figures at full throttle.
| Battery | Volts | No-load rpm (KV × V) | Electrical frequency | ESC steps per second |
|---|---|---|---|---|
| 4S nominal | 14.8 | 281,200 | 28,120 Hz | 168,720 |
| 4S full | 16.8 | 319,200 | 31,920 Hz | 191,520 |
| 6S nominal | 22.2 | 421,800 | 42,180 Hz | 253,080 |
| 6S full | 25.2 | 478,800 | 47,880 Hz | 287,280 |
A 12-pole rotor has 6 pole pairs, so every turn of the shaft is 6 electrical cycles, and a six-step ESC switches the phases 36 times per turn.
About the 3D model
A generic outrunner drawn from NewBeeDrone’s published sizes: the 8 × 4 mm stator and 1 mm shaft. Anything NewBeeDrone doesn’t publish is typical for a motor this size, and the bell’s spoked top, the base and the inside are a generic design, not this motor’s. The colours are read off the maker’s product photos. There are no logos or markings: it is our drawing, not the maker’s.
Sources
- NewBeeDrone: Flow 0804 Dual Ball-Bearing Whoop Motor 14000KV & 19000KV & 25000KV (4 pack) (product page on NewBeeDrone's own store). Retrieved Oct 19, 2026.
- NewBeeDrone: FLOW 0804 feature images (two 681XZZ bearings, 7075 aluminium alloy, rotor airflow; images on the product page). Retrieved Oct 19, 2026.
- NewBeeDrone: FLOW 0804 product photos (side, top and bottom views, spare leads, package), used for finish, spoke and hole counts. Retrieved Oct 19, 2026.
