8- to 10-inch cinematic FPV motor
Lumenier ZIP V2 2812
A 71 g 2812 in matte black for heavier cinematic builds: 12N14P, N52H magnets, a hollow titanium-alloy shaft and NMB bearings, rated 3S–8S (6S most common), in 1150KV and 1300KV.
- Cinematic builds
- 6S (rated 3S–8S)
- 19 × 19 mm M3 motor mounts
The spin is an illustration: the model turns at 1/600 of the no-load speed, and it is a generic 2812 motor drawn from Lumenier’s published sizes, not its exact design. No-load speed is KV × 29.6 V, a nominal pack for this version. Lumenier publishes no bench data for it.
- Weight
- 71 g
- with short wires
from $44.49a motor at GetFPV
A set of four: $177.96
Price seen Oct 19, 2026. Plain links: we earn nothing from them.
What you get for $44.49
Hollow titanium shaft
The hollow titanium-alloy shaft takes a regular prop nut; Lumenier says its threads won't strip, and a screw holds it in for easy maintenance.
Source: Lumenier product page
Matte black
Lumenier's Cinematic Series motors are all black so they don't draw attention in shots.
Source: Lumenier product page
71 g
Lumenier lists 71 g per motor with short wires; 20 cm extension wires come in the box.
Source: Lumenier product page
Balanced at the factory
Lumenier says each motor is dynamically balanced and tested before it ships.
Source: Lumenier product page
What to pair it with
Our reading of Lumenier’s numbers, so your build matches what the motor was tested with.
- Battery
- Rated for 3S–8S; Lumenier says 6S is the most common. (Lumenier product page)
- Props
- A 5 mm shaft threaded for a nut; a low-profile and a standard locking prop nut come in the box. (Lumenier product page)
- Frame
- A 19 × 19 mm bolt pattern with M3 screws; four M3×8 screws come in the box. (Lumenier product page)
Where to buy
- Lumenierthe maker's store; 1300KV $44.49, 1150KV $47.99 and out of stock on the day checked$44.49seen Oct 19, 2026Visit
- GetFPVLumenier's sister store; 1150KV or 1300KV$44.49seen Oct 19, 2026Visit
Plain links, not affiliate links. Prices change; the store’s page has the current one.
Full specs
| Spec | Value | Source |
|---|---|---|
| KV | 1,150 rpm/V (also 1300KV) | Lumenier product page |
| Stator | 28 × 12 mm (2812), 0.2 mm Kawasaki silicon-steel laminations | Lumenier product page |
| Configuration | 12N14P (12 stator slots, 14 magnet poles) | Lumenier product page |
| Battery | 3S–8S LiPo (6S most common) | Lumenier product page |
| Weight | 71 g (with short wires) | Lumenier product page |
| Dimensions | 33.7 × 25.8 mm | Lumenier product page |
| Shaft | Hollow titanium alloy, 5 mm at the prop, threaded for a prop nut; inner shaft 4.8 mm; held in by a screw | Lumenier product page |
| Mounting | 19 × 19 mm, M3 | Lumenier product page |
| Bell | 7075 aluminium bell and base, anodised matte black | Lumenier product page |
| Magnets | N52H curved magnets | Lumenier product page |
| Bearings | Japanese NMB, 12 × 6 × 4 mm | Lumenier product page |
| Leads | 18 AWG, 230 mm, bare wire | Lumenier product page |
| In the box | 4 × M3×8 mounting screws, a standard and a low-profile locking prop nut, a spacer/washer, three 20 cm extra motor wires with heat shrink | Lumenier product page |
Inside the motor
A brushless outrunner: the coils stand still in the middle and the magnets spin around them. From the top down:
- Shaft. Hollow titanium alloy, 5 mm at the prop, threaded for a prop nut; inner shaft 4.8 mm; held in by a screw. (Lumenier product page)
- Bell. 7075 aluminium bell and base, anodised matte black. (Lumenier product page)
- Magnets. N52H curved magnets. (Lumenier product page)
- Stator. The coils are wound on a stack of thin steel laminations: 28 × 12 mm (2812), 0.2 mm Kawasaki silicon-steel laminations. (Lumenier product page)
- Bearings. Japanese NMB, 12 × 6 × 4 mm. (Lumenier product page)
- Base. 19 × 19 mm, M3. (Lumenier product page)
How fast it spins
KV is the motor’s no-load speed per volt. With nothing on the shaft, the 1150KV version reaches about these speeds; a prop loads the motor and brings it down, typically to around 70–75% of these figures at full throttle.
| Battery | Volts | No-load rpm (KV × V) | Electrical frequency | ESC steps per second |
|---|---|---|---|---|
| 4S nominal | 14.8 | 17,020 | 1,986 Hz | 11,914 |
| 4S full | 16.8 | 19,320 | 2,254 Hz | 13,524 |
| 6S nominal | 22.2 | 25,530 | 2,979 Hz | 17,871 |
| 6S full | 25.2 | 28,980 | 3,381 Hz | 20,286 |
A 14-pole rotor has 7 pole pairs, so every turn of the shaft is 7 electrical cycles, and a six-step ESC switches the phases 42 times per turn.
About the 3D model
A generic outrunner drawn from Lumenier’s published sizes: the 28 × 12 mm stator, 33.7 mm bell, 25.8 mm height, 5 mm shaft, 19 mm mounting circle and 12 teeth and 14 magnets. Anything Lumenier doesn’t publish is typical for a motor this size, and the bell’s spoked top, the base and the inside are a generic design, not this motor’s. The colours are read off the maker’s product photos. There are no logos or markings: it is our drawing, not the maker’s.
Sources
- Lumenier: ZIP V2 2812 Cinematic Motor - 1150KV/1300KV (product page). Retrieved Oct 19, 2026.
- Lumenier: ZIP V2 2812 main product photo (1300KV), used for finish. Retrieved Oct 19, 2026.
- Lumenier: ZIP V2 2812 photo of the top (on the product page), used for the spoke count. Retrieved Oct 19, 2026.
