3.5- to 5-inch cinematic FPV motor
Lumenier ZIP V2 2305
A 24 g 2305 in matte black for cinematic builds, with a light M3 shaft that takes M3 props or, with the included adapter, M5 props; in 1800KV, 2400KV and 3200KV.
- 3.5- to 5-inch cinematic builds
- Props with an M3 or M5 hole
- 16 × 16 mm M3 motor mounts
The spin is an illustration: the model turns at 1/600 of the no-load speed, and it is a generic 2305 motor drawn from Lumenier’s published sizes, not its exact design. No-load speed is KV × 22.2 V, a nominal pack for this version. Lumenier publishes no bench data for it.
- Weight
- 24 g
- M3-shaft version; the M5-shaft 2400KV is 30 g
from $29.99a motor at Lumenier
A set of four: $119.96
Price seen Oct 19, 2026. Plain links: we earn nothing from them.
What you get for $29.99
M3 or M5 props
The 3 mm shaft takes M3 props directly; an aluminium adapter in the box screws onto the hub so regular M5 props fit.
Source: Lumenier product page
24 g
Lumenier lists 24 g for the M3-shaft motor; the 2400KV with a 5 mm titanium-alloy shaft is 30 g.
Matte black
Lumenier's Cinematic Series motors are all black so they don't draw attention in shots.
Source: Lumenier product page
Balanced at the factory
Lumenier says each motor is dynamically balanced and tested before it ships.
Source: Lumenier product page
What to pair it with
Our reading of Lumenier’s numbers, so your build matches what the motor was tested with.
- Props
- Props with an M3 hole on the bare shaft, or with a 5 mm hole on the included M3-to-M5 adapter. Lumenier pictures it with a 5-inch three-blade and a 3.5-inch prop. (Lumenier product page)
- Frame
- A 16 × 16 mm bolt pattern; four M3×8 screws come in the box. (Lumenier product page)
Where to buy
- Lumenierthe maker's store; M3 shaft, same price for every KV$29.99seen Oct 19, 2026Visit
- Lumenierthe maker's store; M5 titanium shaft, 2400KV$32.49seen Oct 19, 2026Visit
- GetFPVLumenier's sister store; M3 shaft, 1800KV, 2400KV or 3200KV$29.99seen Oct 19, 2026Visit
- GetFPVLumenier's sister store; M5 shaft, 2400KV$29.99seen Oct 19, 2026Visit
Plain links, not affiliate links. Prices change; the store’s page has the current one.
Full specs
| Spec | Value | Source |
|---|---|---|
| KV | 2,400 rpm/V (also 1800KV and 3200KV) | Lumenier product page |
| Stator | 23 × 5 mm (2305), 0.15 mm Nippon silicon-steel laminations | Lumenier product page |
| Configuration | 9N12P (9 stator slots, 12 magnet poles) | Lumenier product page, Lumenier M5-shaft page |
| Weight | 24 g (M3-shaft version; the M5-shaft 2400KV is 30 g) | Lumenier product page |
| Shaft | 3 mm with an M3 thread; an aluminium M3-to-M5 adapter screws onto the hub for props with a 5 mm hole (the M5-shaft 2400KV has a 5 mm hollow titanium-alloy shaft held in by a screw (S3)) | Lumenier product page |
| Mounting | 16 × 16 mm, M3 | Lumenier product page |
| Bell | 7075 aluminium bell cap and base casing, matte black | Lumenier product page |
| Magnets | N52H arc magnets (the ZIP V2 series text on the same page says N52SH curved magnets) | Lumenier product page, Lumenier M5-shaft page |
| Bearings | Japanese NSK, 5 × 2 × 2.5 mm | Lumenier product page, Lumenier M5-shaft page |
| Leads | 20 AWG | Lumenier product page |
| In the box | 4 × M3×8 socket-cap mounting screws, an M3 locking prop nut, an aluminium M3-to-M5 adapter (the M5-shaft version comes with four mounting screws and an M5 locking prop nut) | Lumenier product page |
Inside the motor
A brushless outrunner: the coils stand still in the middle and the magnets spin around them. From the top down:
- Shaft. 3 mm with an M3 thread; an aluminium M3-to-M5 adapter screws onto the hub for props with a 5 mm hole (the M5-shaft 2400KV has a 5 mm hollow titanium-alloy shaft held in by a screw (S3)). (Lumenier product page)
- Bell. 7075 aluminium bell cap and base casing, matte black. (Lumenier product page)
- Magnets. N52H arc magnets (the ZIP V2 series text on the same page says N52SH curved magnets). (Lumenier product page, Lumenier M5-shaft page)
- Stator. The coils are wound on a stack of thin steel laminations: 23 × 5 mm (2305), 0.15 mm Nippon silicon-steel laminations. (Lumenier product page)
- Bearings. Japanese NSK, 5 × 2 × 2.5 mm. (Lumenier product page, Lumenier M5-shaft page)
- Base. 16 × 16 mm, M3. (Lumenier product page)
How fast it spins
KV is the motor’s no-load speed per volt. With nothing on the shaft, the 2400KV version reaches about these speeds; a prop loads the motor and brings it down, typically to around 70–75% of these figures at full throttle.
| Battery | Volts | No-load rpm (KV × V) | Electrical frequency | ESC steps per second |
|---|---|---|---|---|
| 4S nominal | 14.8 | 35,520 | 3,552 Hz | 21,312 |
| 4S full | 16.8 | 40,320 | 4,032 Hz | 24,192 |
| 6S nominal | 22.2 | 53,280 | 5,328 Hz | 31,968 |
| 6S full | 25.2 | 60,480 | 6,048 Hz | 36,288 |
A 12-pole rotor has 6 pole pairs, so every turn of the shaft is 6 electrical cycles, and a six-step ESC switches the phases 36 times per turn.
About the 3D model
A generic outrunner drawn from Lumenier’s published sizes: the 23 × 5 mm stator, 3 mm shaft, 16 mm mounting circle and 9 teeth and 12 magnets. Anything Lumenier doesn’t publish is typical for a motor this size, and the bell’s spoked top, the base and the inside are a generic design, not this motor’s. The colours are read off the maker’s product photos. There are no logos or markings: it is our drawing, not the maker’s.
Sources
- Lumenier: ZIP V2 2305 Cinematic Motor w/ M3 Shaft - 1800KV/2400KV/3200KV (product page, with photos on 5-inch and 3.5-inch props). Retrieved Oct 19, 2026.
- Lumenier: ZIP V2 2305 M3 2400KV main product photo, used for finish. Retrieved Oct 19, 2026.
- Lumenier: ZIP V2 2305 Cinematic Motor w/ M5 Shaft - 2400KV (product page). Retrieved Oct 19, 2026.
- Lumenier: ZIP V2 2305 M3 photo of the top (on the product page), used for the spoke count. Retrieved Oct 19, 2026.
