Cinewhoop motor
Lumenier ZIP V2 2006
A 23 g 2006 in matte black for cinematic builds: 9N12P, N52H arc magnets, NSK bearings and a 1.5 mm shaft with a T-mount for props, in 1800KV and 2450KV.
- Cinewhoops and cinematic builds
- Props with a T-mount (M2, 5 mm)
The spin is an illustration: the model turns at 1/600 of the no-load speed, and it is a generic 2006 motor drawn from Lumenier’s published sizes, not its exact design. No-load speed is KV × 22.2 V, a nominal pack for this version. Lumenier publishes no bench data for it.
- Weight
- 23 g
from $22.49a motor at Lumenier
A set of four: $89.96
Price seen Oct 19, 2026. Plain links: we earn nothing from them.
What you get for $22.49
T-mount props
Props bolt to the bell with M2 screws 5 mm apart on a 1.5 mm shaft.
Source: Lumenier product page
23 g
Lumenier lists 23 g per motor.
Source: Lumenier product page
Matte black
Lumenier's Cinematic Series motors are all black so they don't draw attention in shots.
Source: Lumenier product page
Balanced at the factory
Lumenier says each motor is dynamically balanced and tested before it ships.
Source: Lumenier product page
What to pair it with
Our reading of Lumenier’s numbers, so your build matches what the motor was tested with.
- Props
- Props with a T-mount: M2 holes, 5 mm eye to eye, on a 1.5 mm shaft. (Lumenier product page)
- Frame
- M2 screws (4 × M2×5 and 8 × M2×7 in the box). Lumenier's pages give the bolt pattern as 12 × 12 mm and 9 × 9 mm; check the frame against the motor. (Lumenier product page, GetFPV (Lumenier) page)
Where to buy
- Lumenierthe maker's store; same price for both KVs$22.49seen Oct 19, 2026Visit
- GetFPVLumenier's sister store; 1800KV or 2450KV$22.49seen Oct 19, 2026Visit
Plain links, not affiliate links. Prices change; the store’s page has the current one.
Full specs
| Spec | Value | Source |
|---|---|---|
| KV | 1,800 rpm/V (also 2450KV) | Lumenier product page |
| Stator | 20 × 6 mm (2006), 0.15 mm Nippon silicon-steel laminations | Lumenier product page, GetFPV (Lumenier) page |
| Configuration | 9N12P (9 stator slots, 12 magnet poles) | Lumenier product page |
| Weight | 23 g | Lumenier product page |
| Shaft | 1.5 mm, with a T-mount for props (M2 holes, 5 mm eye to eye) | Lumenier product page |
| Mounting | M2 screws; 12 × 12 mm on GetFPV's spec list, 9 × 9 mm on lumenier.com's (Lumenier's two pages disagree) | GetFPV (Lumenier) page, Lumenier product page |
| Bell | 7075 aluminium bell cap and base casing, matte black | Lumenier product page |
| Magnets | N52H arc magnets (the ZIP V2 series text on the same page says N52SH curved magnets) | Lumenier product page |
| Bearings | Japanese NSK, 5 × 2 × 2.5 mm | Lumenier product page |
| Leads | 24 AWG | Lumenier product page |
| In the box | 4 × M2×5 and 8 × M2×7 socket-cap screws | Lumenier product page |
Inside the motor
A brushless outrunner: the coils stand still in the middle and the magnets spin around them. From the top down:
- Shaft. 1.5 mm, with a T-mount for props (M2 holes, 5 mm eye to eye). (Lumenier product page)
- Bell. 7075 aluminium bell cap and base casing, matte black. (Lumenier product page)
- Magnets. N52H arc magnets (the ZIP V2 series text on the same page says N52SH curved magnets). (Lumenier product page)
- Stator. The coils are wound on a stack of thin steel laminations: 20 × 6 mm (2006), 0.15 mm Nippon silicon-steel laminations. (Lumenier product page, GetFPV (Lumenier) page)
- Bearings. Japanese NSK, 5 × 2 × 2.5 mm. (Lumenier product page)
- Base. M2 screws; 12 × 12 mm on GetFPV's spec list, 9 × 9 mm on lumenier.com's (Lumenier's two pages disagree). (GetFPV (Lumenier) page, Lumenier product page)
How fast it spins
KV is the motor’s no-load speed per volt. With nothing on the shaft, the 1800KV version reaches about these speeds; a prop loads the motor and brings it down, typically to around 70–75% of these figures at full throttle.
| Battery | Volts | No-load rpm (KV × V) | Electrical frequency | ESC steps per second |
|---|---|---|---|---|
| 4S nominal | 14.8 | 26,640 | 2,664 Hz | 15,984 |
| 4S full | 16.8 | 30,240 | 3,024 Hz | 18,144 |
| 6S nominal | 22.2 | 39,960 | 3,996 Hz | 23,976 |
| 6S full | 25.2 | 45,360 | 4,536 Hz | 27,216 |
A 12-pole rotor has 6 pole pairs, so every turn of the shaft is 6 electrical cycles, and a six-step ESC switches the phases 36 times per turn.
About the 3D model
A generic outrunner drawn from Lumenier’s published sizes: the 20 × 6 mm stator, 1.5 mm shaft and 9 teeth and 12 magnets. Anything Lumenier doesn’t publish is typical for a motor this size, and the bell’s spoked top, the base and the inside are a generic design, not this motor’s. The colours are read off the maker’s product photos. There are no logos or markings: it is our drawing, not the maker’s.
Sources
- Lumenier: ZIP V2 2006 Cinematic Motor - 1800KV/2450KV (product page). Retrieved Oct 19, 2026.
- GetFPV (Lumenier's own store): Lumenier ZIP V2 2006 Cinematic Motor - 1800KV/2450KV (product page, read through r.jina.ai). Retrieved Oct 19, 2026.
- Lumenier: ZIP V2 2006 main product photo, used for finish. Retrieved Oct 19, 2026.
- Lumenier: ZIP V2 2006 photo of the top (on the product page), used for the spoke count. Retrieved Oct 19, 2026.
