Long range and freestyle FPV motor
Hyperlite 2408.5 Team Edition
A 40 g 2408.5 for long range and freestyle on 4S–6S, in five KVs from 1322KV to 2522KV, with a titanium alloy hollow shaft, N52H arc magnets and NMB 9 × 4 × 4 mm bearings.
- Long range and freestyle
- 4S–6S, from 1322KV to 2522KV
- 16 × 16 mm M3 motor mounts
The spin is an illustration: the model turns at 1/600 of the no-load speed, and it is a generic 2408.5 motor drawn from Hyperlite’s published sizes, not its exact design. No-load speed is KV × 22.2 V, a nominal pack for this version. Hyperlite publishes no bench data for it.
- Weight
- 40 g
- with short wires
Plain links: we earn nothing from them.
What you get
For long range and freestyle
Pyrodrone says it designed the 2408.5 line with long-range and freestyle pilots in mind.
Source: Pyrodrone product page
Five KVs
1322KV, 1622KV, 1922KV, 2222KV and 2522KV, all rated 4S–6S and all sold on one page at one price.
Source: Pyrodrone product page
Titanium hollow shaft
A titanium alloy hollow shaft with an M5 thread, on Japanese NMB 9 × 4 × 4 mm bearings.
Source: Pyrodrone product page
40 g
Pyrodrone lists 40 g with short wires, with 20 AWG leads 16 cm long.
Source: Pyrodrone product page
What to pair it with
Our reading of Hyperlite’s numbers, so your build matches what the motor was tested with.
- Battery
- 4S–6S LiPo on every KV. (Pyrodrone product page)
- Frame
- A 16 × 16 mm pattern with M3 screws. Pyrodrone's page for its Hyperlite Floss 3.0 7-inch long-range frame shows footage flown on the 2408.5 1622KV. (Pyrodrone product page, Pyrodrone Floss 3.0 7-inch page)
- Props
- An M5 prop thread; a 5 mm prop nut and a washer come in the box. (Pyrodrone product page)
Where to buy
- PyrodroneHyperlite's own store; choose the KV (1622KV and 1922KV in stock, 1322KV, 2222KV and 2522KV out of stock on the day checked)$32.99seen Oct 19, 2026Visit
Plain links, not affiliate links. Prices change; the store’s page has the current one.
Full specs
| Spec | Value | Source |
|---|---|---|
| KV | 1,622 rpm/V (also 1322KV, 1922KV, 2222KV and 2522KV, chosen on the same page) | Pyrodrone product page |
| Stator | 0.15 mm Nippon Steel silicon-steel laminations (sold as a 2408.5) | Pyrodrone product page |
| Configuration | 12N14P (12 stator slots, 14 magnet poles) | Pyrodrone product page |
| Battery | 4S–6S LiPo (every KV) | Pyrodrone product page |
| Weight | 40 g (with short wires) | Pyrodrone product page |
| Shaft | titanium alloy, hollow; M5 prop thread | Pyrodrone product page |
| Mounting | 16 × 16 mm, M3 | Pyrodrone product page |
| Bell | Al 7075 bell cap and base casing | Pyrodrone product page |
| Magnets | N52H arc magnets | Pyrodrone product page |
| Bearings | Japanese NMB 9 × 4 × 4 mm | Pyrodrone product page |
| Leads | 20 AWG, 16 cm | Pyrodrone product page |
| In the box | a 5 mm prop nut, a prop washer and 4 × M3×8 mm mounting screws | Pyrodrone product page |
Inside the motor
A brushless outrunner: the coils stand still in the middle and the magnets spin around them. From the top down:
- Shaft. titanium alloy, hollow; M5 prop thread. (Pyrodrone product page)
- Bell. Al 7075 bell cap and base casing. (Pyrodrone product page)
- Magnets. N52H arc magnets. (Pyrodrone product page)
- Stator. The coils are wound on a stack of thin steel laminations: 0.15 mm Nippon Steel silicon-steel laminations (sold as a 2408.5). (Pyrodrone product page)
- Bearings. Japanese NMB 9 × 4 × 4 mm. (Pyrodrone product page)
- Base. 16 × 16 mm, M3. (Pyrodrone product page)
How fast it spins
KV is the motor’s no-load speed per volt. With nothing on the shaft, the 1622KV version reaches about these speeds; a prop loads the motor and brings it down, typically to around 70–75% of these figures at full throttle.
| Battery | Volts | No-load rpm (KV × V) | Electrical frequency | ESC steps per second |
|---|---|---|---|---|
| 4S nominal | 14.8 | 24,006 | 2,801 Hz | 16,804 |
| 4S full | 16.8 | 27,250 | 3,179 Hz | 19,075 |
| 6S nominal | 22.2 | 36,008 | 4,201 Hz | 25,206 |
| 6S full | 25.2 | 40,874 | 4,769 Hz | 28,612 |
A 14-pole rotor has 7 pole pairs, so every turn of the shaft is 7 electrical cycles, and a six-step ESC switches the phases 42 times per turn.
About the 3D model
A generic outrunner drawn from Hyperlite’s published sizes: the 2408.5 stator, 16 mm mounting circle and 12 teeth and 14 magnets. Anything Hyperlite doesn’t publish is typical for a motor this size, and the bell’s spoked top, the base and the inside are a generic design, not this motor’s. The colours are read off the maker’s product photos. There are no logos or markings: it is our drawing, not the maker’s.
Sources
- Pyrodrone (Hyperlite's own store): HYPERLITE 2408.5 TEAM EDITION (CHOOSE KV) (product page, read through r.jina.ai). Retrieved Oct 19, 2026.
- Pyrodrone: Hyperlite 2408.5 Team Edition main product photo, used for finish. Retrieved Oct 19, 2026.
- Pyrodrone: Hyperlite 2408.5 Team Edition photo of the top of the bell, used to count its spokes. Retrieved Oct 19, 2026.
- Pyrodrone (Hyperlite's own store): Hyperlite Floss 3.0 Long Range 7" Frame (product page; links footage flown on Hyperlite 2408.5 1622KV motors, read through r.jina.ai). Retrieved Oct 19, 2026.
