GEPRC SPEEDX2 0802

What you get for $11.99

• 44 g on 1S

  The 22000KV pulled 44.02 g on a GF1635 four-blade at 4.2 V, drawing 7.8 A (32.76 W).

  Source: GEPRC load performance

• 2.0 g

  GEPRC weighs it at 2.0 g with its 40 mm lead and plug.

  Source: GEPRC weight photo, GEPRC size photo

• Three-hole base

  Three M1.4 holes on a 6.6 mm circle, and a 1 mm shaft standing 5 mm above the hub.

  Source: GEPRC drawing

• Class H wire, N52H magnets

  The windings use Class H enamelled wire rated to 180 °C, around sintered N52H magnets.

  Source: GEPRC spec image

What to pair it with

Our reading of GEPRC’s numbers, so your build matches what the motor was tested with.

ESC

GEPRC lists a 6 A ESC for the 17000KV and 10 A for the 22000KV. Its tables stop at the maximum currents it gives, 5 A and 7.8 A. (GEPRC spec image, GEPRC load performance)

Props

GEPRC tested both KVs on a GF1635 four-blade. Its page says 1.4 and 1.6-inch props, and lists the 17000KV for 1.6-inch freestyle and the 22000KV for 1.4-inch. (GEPRC product page, GEPRC load performance, GEPRC summary image)

Battery

1S, with packs of 380–530 mAh. (GEPRC product page, GEPRC spec image)

Frame

Three M1.4 holes, equally spaced on a 6.6 mm circle; GEPRC made it for tiny whoop frames. (GEPRC product page, GEPRC drawing)

Where to buy

• GEPRCthe maker’s store; one motor, 17000KV or 22000KV (sets of four $43.99)
  $11.99seen Oct 19, 2026
  Visit

Plain links, not affiliate links. Prices change; the store’s page has the current one.

Full specs

Bench data

Redrawn from GEPRC’s test reports. Thrust is static pull on a bench, more than you get in flight. Power is volts × amps; efficiency is thrust divided by power.

Inside the motor

A brushless outrunner: the coils stand still in the middle and the magnets spin around them. From the top down:

• Bell. Black, with a silver three-spoke top, over sintered N52H magnets. (GEPRC spec image, GEPRC product photo, GEPRC top photo)
• Stator. 8.4 × 2 mm, 9N12P, on 0.2 mm laminations, wound with Class H wire rated to 180 °C. (GEPRC product page, GEPRC spec image)
• Bearings. 3 × 1.5 × 1 mm bearings. (GEPRC spec image)

How fast it spins

KV is the motor’s no-load speed per volt. With nothing on the shaft, the 22000KV version reaches about these speeds; a prop loads the motor and brings it down, typically to around 70–75% of these figures at full throttle.

A 12-pole rotor has 6 pole pairs, so every turn of the shaft is 6 electrical cycles, and a six-step ESC switches the phases 36 times per turn.

About the 3D model

A generic outrunner drawn from GEPRC’s published sizes: the 8.4 × 2 mm stator, 10.7 mm bell, 8.5 mm height, 1 mm shaft, 6.6 mm mounting circle and 9 teeth and 12 magnets. Anything GEPRC doesn’t publish is typical for a motor this size, and the bell’s spoked top, the base and the inside are a generic design, not this motor’s. The colours are read off the maker’s product photos. There are no logos or markings: it is our drawing, not the maker’s.

Sources

1. GEPRC: SPEEDX2 0802 Brushless Motor 17000KV/22000KV (product page, with the spec list). Retrieved Oct 19, 2026.
2. GEPRC: SPEEDX2 0802 17000KV and 22000KV specifications, beside the 0803 (image on the product page). Retrieved Oct 19, 2026.
3. GEPRC: SPEEDX2 0802 product drawing, beside the 0803 (image on the product page). Retrieved Oct 19, 2026.
4. GEPRC: SPEEDX2 0802 load performance, 17000KV and 22000KV at 4.2 V on a GF1635 four-blade, in 0.5 A current steps up to each KV’s maximum current (image on the product page, which also has the 0803). The speed column is blank in both tables and is left out.. Retrieved Oct 19, 2026.
5. GEPRC: SPEEDX2 0802 power, pull and suitability for each KV: 17000KV for 1.6-inch and 22000KV for 1.4-inch freestyle (image on the product page). Retrieved Oct 19, 2026.
6. GEPRC: SPEEDX2 0802 on a scale, 2.0 g with its lead and plug (image on the product page). Retrieved Oct 19, 2026.
7. GEPRC: SPEEDX2 0802 17000KV product photo (first gallery image). Retrieved Oct 19, 2026.
8. GEPRC: SPEEDX2 0802 from above, showing the three-spoke top (gallery image). Retrieved Oct 19, 2026.
9. GEPRC: SPEEDX2 0802 from below, showing the three-arm base and the leads (gallery image). Retrieved Oct 19, 2026.
10. GEPRC: SPEEDX2 0802 sizes: 1 mm shaft, 10.7 mm across, 4.7 mm bell, 40 mm lead to the plug (gallery image). Retrieved Oct 19, 2026.