Foxeer Black Hornet 2806.5

What it pulls

Foxeer’s own bench test, one line per prop. Drag across the chart to move the throttle; the model above follows.

What you get

• About 2.6 kg of pull on 6S

  At full throttle at 24 V it pulled 2,587 g on a DAL7056×3 (40.1 A) and 2,255 g on a DAL F7×3 (39.8 A) on Foxeer's bench.

  Source: Foxeer spec sheet

• Semi-hollow titanium shaft

  A 4 mm semi-hollow titanium shaft, which Foxeer says cuts weight while keeping the motor strong, with a 5 mm threaded end for the prop.

  Source: Foxeer spec sheet

• N52H magnets

  Foxeer lists N52H magnets.

  Source: Foxeer spec sheet

• 260 °C windings

  Single-wrap windings of single-crystal oxygen-free copper, in wire Foxeer rates for 260 °C.

  Source: Foxeer spec sheet

What to pair it with

Our reading of Foxeer’s numbers, so your build matches what the motor was tested with.

ESC

Foxeer's max current is 42.8 A, on the GF7042 at 24 V; on its other props it drew 25.4–40.1 A at full throttle. A 45 A ESC covers it. (Foxeer spec sheet)

Props

Foxeer tested it on the GF6042, GF7042, DAL7040×2, DAL F7×3 and DAL7056×3. At 24 V it pulled the most on the DAL7056×3 (2,587 g) and the DAL F7×3 (2,255 g). (Foxeer spec sheet)

Battery

4S–6S; Foxeer tested it at 21 V and 24 V. (Foxeer spec sheet)

Frame

Four M3 holes on a 19 × 19 mm pattern. (Foxeer spec sheet)

Where to buy

• Pyrodrone1350KV; out of stock
  $37.99seen Oct 19, 2026
  Visit

Plain links, not affiliate links. Prices change; the store’s page has the current one.

Full specs

Bench data

Redrawn from Foxeer’s test reports. Thrust is static pull on a bench, more than you get in flight. Power is volts × amps; efficiency is thrust divided by power.

Inside the motor

A brushless outrunner: the coils stand still in the middle and the magnets spin around them. From the top down:

• Shaft. Semi-hollow titanium, 4 mm, with a 5 mm threaded end for the prop. (Foxeer spec sheet)
• Stator. 12N14P, 28 × 6.5 mm, with a single-wrap winding of single-crystal oxygen-free copper in 260 °C wire. (Foxeer spec sheet)

How fast it spins

KV is the motor’s no-load speed per volt. With nothing on the shaft, the 1350KV version reaches about these speeds; a prop loads the motor and brings it down, typically to around 70–75% of these figures at full throttle.

A 14-pole rotor has 7 pole pairs, so every turn of the shaft is 7 electrical cycles, and a six-step ESC switches the phases 42 times per turn.

About the 3D model

A generic outrunner drawn from Foxeer’s published sizes: the 28 × 6.5 mm stator, 34.3 mm bell, 18.8 mm height, 5 mm shaft, 19 mm mounting circle and 12 teeth and 14 magnets. Anything Foxeer doesn’t publish is typical for a motor this size, and the bell’s spoked top, the base and the inside are a generic design, not this motor’s. The colours are read off the maker’s product photos. There are no logos or markings: it is our drawing, not the maker’s.

Sources

1. Foxeer: Black Hornet 2806.5 1350KV FPV Motor (product page on Foxeer's own site, Wayback Machine copy captured 2023-07-13; the address now shows Foxeer's home page). Retrieved Oct 19, 2026.
2. Foxeer: Black Hornet 2806.5 description image on the product page: shaft, magnets and winding, then the technical data, drawing and bench data on 6- and 7-inch props at 21 V and 24 V. Foxeer's motor temperature after 5 s at full throttle is left out, as it has no figure at 50%.. Retrieved Oct 19, 2026.
3. Foxeer: Black Hornet 2806.5 main product photo, used for finish. Retrieved Oct 19, 2026.
4. Foxeer: Black Hornet 2806.5 product photo (on the product page), used for the top's colour in sunlight. Retrieved Oct 19, 2026.