Foxeer Datura 2806.5

What it pulls

Foxeer’s own bench test, one line per prop. Drag across the chart to move the throttle; the model above follows.

What you get for $32.49

• Up to 2.7 kg of pull

  At full throttle on a DAL7056×3, the 1350KV pulled 2,587 g at 24 V (40.1 A) and the 1750KV 2,711 g at 21 V (55.4 A) on Foxeer's bench.

  Source: Foxeer spec sheets

• Semi-hollow titanium shaft

  A 4 mm semi-hollow titanium shaft, which Foxeer says cuts weight while keeping the motor strong, with a 5 mm threaded end for the prop.

  Source: Foxeer spec sheets

• N52H magnets

  Foxeer lists N52H magnets.

  Source: Foxeer spec sheets

• 260 °C windings

  Single-wrap windings of single-crystal oxygen-free copper, in wire Foxeer rates for 260 °C.

  Source: Foxeer spec sheets

What to pair it with

Our reading of Foxeer’s numbers, so your build matches what the motor was tested with.

ESC

Foxeer's max currents are 42.8 A for the 1350KV (GF7042 at 24 V) and 59.8 A for the 1750KV (GF7042 at 21 V). A 45 A ESC covers the 1350KV on every prop Foxeer tested; the 1750KV wants 60 A. (Foxeer spec sheets)

Props

Foxeer tested both KVs on 6- and 7-inch props. The 1350KV pulled the most on the DAL7056×3 (2,587 g at 24 V) and the DAL F7×3 (2,255 g at 24 V); the 1750KV on the DAL7056×3 (2,711 g at 21 V) and the DAL7×3 (2,419 g at 21 V). (Foxeer spec sheets)

Battery

4S–6S for both KVs. Foxeer tested the 1350KV at 21 V and 24 V, and the 1750KV mostly at 21 V, with runs at 16 V and 24 V. (Foxeer spec sheets)

Frame

Four M3 holes on a 19 × 19 mm pattern. (Foxeer spec sheets)

Where to buy

• RaceDayQuads1750KV
  $32.49seen Oct 19, 2026
  Visit
• WREKD1750KV
  $32.49seen Oct 19, 2026
  Visit
• Unmanned Tech1350KV; 1750KV out of stock
  price on the store’s page
  Visit
• Pyrodrone1350KV; out of stock
  $37.99seen Oct 19, 2026
  Visit

Plain links, not affiliate links. Prices change; the store’s page has the current one.

Full specs

Bench data

Redrawn from Foxeer’s test reports. Thrust is static pull on a bench, more than you get in flight. Power is volts × amps; efficiency is thrust divided by power.

Inside the motor

A brushless outrunner: the coils stand still in the middle and the magnets spin around them. From the top down:

• Shaft. Semi-hollow titanium, 4 mm, with a 5 mm threaded end for the prop. (Foxeer spec sheets)
• Stator. 12N14P, 28 × 6.5 mm, with a single-wrap winding of single-crystal oxygen-free copper in 260 °C wire. (Foxeer spec sheets)

How fast it spins

KV is the motor’s no-load speed per volt. With nothing on the shaft, the 1350KV version reaches about these speeds; a prop loads the motor and brings it down, typically to around 70–75% of these figures at full throttle.

A 14-pole rotor has 7 pole pairs, so every turn of the shaft is 7 electrical cycles, and a six-step ESC switches the phases 42 times per turn.

About the 3D model

A generic outrunner drawn from Foxeer’s published sizes: the 28 × 6.5 mm stator, 34.3 mm bell, 18.8 mm height, 5 mm shaft, 19 mm mounting circle and 12 teeth and 14 magnets. Anything Foxeer doesn’t publish is typical for a motor this size, and the bell’s spoked top, the base and the inside are a generic design, not this motor’s. The colours are read off the maker’s product photos. There are no logos or markings: it is our drawing, not the maker’s.

Sources

1. Foxeer: Datura 2806.5 FPV Motor (product page on Foxeer's own site, Wayback Machine copy captured 2022-10-06; the address now shows Foxeer's home page). Retrieved Oct 19, 2026.
2. Foxeer: Datura 2806.5 description image on the product page: shaft, magnets and winding, then for each KV the technical data, drawing and bench data on 6- and 7-inch props at 16 V to 24 V. Foxeer's motor temperature after 5 s at full throttle is left out, as it has no figure at 50%; the 1750KV's GF7042 and DAL7×3 rows are blank at the second voltage.. Retrieved Oct 19, 2026.
3. Foxeer: Datura 2806.5 main product photo, used for finish. Retrieved Oct 19, 2026.