FlyFish Flash 2207

What it pulls

FlyFish’s own bench test, one line per prop. Drag across the chart to move the throttle; the model above follows.

What you get for $20.90

• About 1.8 kg of pull on 6S

  On FlyFishRC’s 24 V bench the 1850KV pulled 1,814 g at full throttle on an HQ S5, drawing 40.01 A; the black 2005KV pulled 1,754 g on a GF 51466.

  Source: FlyFishRC spec sheet (grey and purple), FlyFishRC spec sheet (black)

• One-piece 7075 bell

  FlyFishRC’s Uni-Bell is one piece of 7075 aluminium with a frosted matte finish; it says the design adds crash resistance without adding weight.

  Source: FlyFishRC product page (1850KV)

• NMB bearings, N52SH magnets

  NMB 9 × 4 × 4 mm bearings, N52SH magnets, and copper wire rated to 220 °C.

  Source: FlyFishRC product page (1850KV), FlyFishRC replacement bearing

• Braced lead exit

  FlyFishRC thickened the base and added braces where the wires leave it, and gave the prop seat a non-slip shape.

  Source: FlyFishRC product page (1850KV)

What to pair it with

Our reading of FlyFish’s numbers, so your build matches what the motor was tested with.

ESC

FlyFishRC gives a 10-second peak of 40.01 A for the 1850KV, 41.42 A for the 1950KV and 42.70 A for the 2005KV on 24 V, and 44.51 A for the 2750KV on 16 V (44.93 A in its GF 51466 test). A 45 A ESC covers all four. (FlyFishRC spec sheet (grey and purple), FlyFishRC spec sheet (black))

Props

5-inch props. On FlyFishRC’s 24 V bench the 1850KV pulled most on an HQ S5 (1,814 g) and least on an HQ R35 (1,642 g); the 1950KV and 2005KV pulled 1,668–1,754 g; the 2750KV pulled 1,371–1,395 g on 16 V. (FlyFishRC spec sheet (grey and purple), FlyFishRC spec sheet (black))

Battery

6S for the 1850KV, 1950KV and 2005KV; 4S for the 2750KV, which FlyFishRC tested on 16 V. The grey-and-purple page lists 4S/6S, the black page 6S. (FlyFishRC product page (1850KV), FlyFishRC product page (black), FlyFishRC spec sheet (grey and purple))

Frame

Four M3 holes on a 16 mm circle (16 × 16 mm) and 150 mm 20 AWG leads. (FlyFishRC product page (1850KV), FlyFishRC spec sheet (grey and purple))

Where to buy

• FlyFishRCthe maker’s store; grey and purple, 1850KV
  $21.90seen Oct 19, 2026
  Visit
• FlyFishRCthe maker’s store; black, 1950KV or 2005KV
  $20.90seen Oct 19, 2026
  Visit

Plain links, not affiliate links. Prices change; the store’s page has the current one.

Full specs

Bench data

Redrawn from FlyFish’s test reports. Thrust is static pull on a bench, more than you get in flight. Power is volts × amps; efficiency is thrust divided by power.

Inside the motor

A brushless outrunner: the coils stand still in the middle and the magnets spin around them. From the top down:

• Bell. One piece of 7075 aluminium (FlyFishRC’s Uni-Bell), φ28.4 mm, with a frosted matte finish. Replacement bells come with an M3 × 4 mm screw, washers and a dampening O-ring. (FlyFishRC product page (1850KV), FlyFishRC spec sheet (grey and purple), FlyFishRC replacement bell)
• Shaft. 5 mm titanium alloy (steel on the black version) with an M5 thread; it stands 13.5 mm above the bell, 8 mm of it threaded. (FlyFishRC product page (1850KV), FlyFishRC product page (black), FlyFishRC spec sheet (grey and purple))
• Magnets. N52SH, which FlyFishRC describes as heat resistant. (FlyFishRC product page (1850KV))
• Stator. 22 × 7 mm with 12 slots, wound with copper wire rated to 220 °C. (FlyFishRC product page (1850KV))
• Bearings. NMB L-940ZZ, 9 × 4 × 4 mm, sold by FlyFishRC as replacements for the Flash 2207 and 2306. (FlyFishRC replacement bearing)
• Base. Thickened, with braces protecting the lead exit, and four M3 holes on a 16 mm circle. (FlyFishRC product page (1850KV), FlyFishRC spec sheet (grey and purple))

How fast it spins

KV is the motor’s no-load speed per volt. With nothing on the shaft, the 1850KV version reaches about these speeds; a prop loads the motor and brings it down, typically to around 70–75% of these figures at full throttle.

A 14-pole rotor has 7 pole pairs, so every turn of the shaft is 7 electrical cycles, and a six-step ESC switches the phases 42 times per turn.

About the 3D model

A generic outrunner drawn from FlyFish’s published sizes: the 22 × 7 mm stator, 28.4 mm bell, 18.8 mm height, 5 mm shaft, 16 mm mounting circle and 12 teeth and 14 magnets. Anything FlyFish doesn’t publish is typical for a motor this size, and the bell’s spoked top, the base and the inside are a generic design, not this motor’s. The colours are read off the maker’s product photos. There are no logos or markings: it is our drawing, not the maker’s.

Sources

1. FlyFishRC: Flash 2207 1850KV FPV Motor (product page, grey and purple). Retrieved Oct 19, 2026.
2. FlyFishRC: Flash 2207 1950KV 2005KV FPV Black Motor (product page). Retrieved Oct 19, 2026.
3. FlyFishRC: Flash 2207 (Grey & Purple) spec sheet: spec table, dimension drawing and test report for the 1850KV at 24 V and the 2750KV at 16 V (image on the 1850KV product page). Retrieved Oct 19, 2026.
4. FlyFishRC: Flash 2207 (Black) spec sheet: spec table, dimension drawing and test report for the 1950KV and 2005KV at 24 V (image on the black product page). The rpm column is left out of the 1950KV tables: from 50% to 90% throttle its figures are the same as in the 1850KV’s GF51466 and HQ S5 tables (S3), a different motor.. Retrieved Oct 19, 2026.
5. FlyFishRC: NMB L-940ZZ 9x4x4 Bearing (replacement bearing for Flash 2207/2306 motors). Retrieved Oct 19, 2026.
6. FlyFishRC: Flash 2207 Replacement Motor Bell (for the 1850KV and 2750KV motor). Retrieved Oct 19, 2026.