1S tiny whoop motor
BetaFPV 0702 II / 0702SE II
A 1.47 g motor for 65 mm 1S whoops, pulling 35.4 g at full throttle on a Gemfan 1219S in BetaFPV's 4 V test (0702SE II, 27000KV).
- 65 mm 1S whoops (Air65, Meteor65 Pro)
- 1S
- 31 mm props: Gemfan 1208 three-blade or 1210 two-blade
The spin is an illustration: the model turns at 1/600 of the no-load speed, and it is a generic 0702 motor drawn from BetaFPV’s published sizes, not its exact design. Thrust, current and power are BetaFPV’s bench figures for the GF 1219S-3P prop at 4 V, read straight across between its throttle steps. Its data starts at 10% throttle.
- Max thrust
- 35 g
- GF 1219S-3P prop, 4 V
- Weight
- 1.47 g
- 0702SE II 27000KV with its 35 mm lead and plug; 1.45 g for the 23000KV, 1.55 g for the 0702 II. BetaFPV gives 1.40 g for the 27000KV with a 25 mm lead.
- Peak current
- 5.2 A
- full throttle
- Max power
- 21 W
- full throttle
Plain links: we earn nothing from them.
What it pulls
BetaFPV’s own bench test, one line per prop. Drag across the chart to move the throttle; the model above follows.
At 60% with the GF 1219S-3P: 18 g of thrust, 2.9 A, 12 W, 1.58 g per watt.
On your quad
0.2 : 1
Thrust to weight at full throttle: four motors pull 142 g with the GF 1219S-3P at 4 V.
At 60% throttle they pull 73 g, 0.1 times the quad’s weight.
All-up weight is the quad ready to fly, with its battery and camera. The thrust is the maker’s static bench figure; in the air it is lower.
What you get
Tile-shaped magnets
With the new magnets, a reworked magnetic circuit and a higher coil fill, BetaFPV measured 12.7–14.8% more thrust than the first 0702, and says the magnets all but end magnetic degradation in hard flying.
Source: BetaFPV product page
Bushings or bearings
The 0702SE II runs on brass bushings and weighs 1.45–1.47 g; the 0702 II has dual ball bearings and weighs 1.55 g.
Source: BetaFPV product page
PEEK screws in the box
BetaFPV says 12 PEEK screws weigh 0.10 g and save up to 0.46 g per build against metal ones; metal screws come too.
Source: BetaFPV product page
Bench numbers
Full throttle at 4 V on a Gemfan 1219S: 32.0 g (23000KV), 35.4 g (27000KV), 37.2 g (30000KV).
Source: BetaFPV product page
What to pair it with
Our reading of BetaFPV’s numbers, so your build matches what the motor was tested with.
- ESC
- BetaFPV pairs it with its Air FC and Matrix 1S 5IN1 boards. At full throttle on its 4 V bench a motor draws 4.19 A (23000KV), 5.20 A (27000KV) or 5.15 A (30000KV). (BetaFPV product page, BetaFPV 0702 II sheet, BetaFPV 0702SE II sheet)
- Props
- Gemfan 1208 three-blade (31 mm) for racing on the 27000KV or 30000KV, Gemfan 1210 two-blade (31 mm) for freestyle on the 27000KV. BetaFPV's bench uses the Gemfan 1219S three-blade. (BetaFPV product page, BetaFPV 0702 II sheet, BetaFPV 0702SE II sheet)
- Battery
- 1S; BetaFPV suggests its LAVA 1S 260 mAh or 300 mAh packs. (BetaFPV product page)
- Frame
- Three M1.4 screws on a 6.6 mm circle; BetaFPV names its Air65 and Meteor65 Pro frames. (BetaFPV product page)
Where to buy
- BETAFPVthe maker's store; set of 4: $43.99 0702SE II, $48.99 0702 II; all sold out when checked$43.99seen Oct 19, 2026Visit
- GetFPV0702SE II, 23000KV or 27000KVprice on the store’s pageVisit
Plain links, not affiliate links. Prices change; the store’s page has the current one.
Full specs
| Spec | Value | Source |
|---|---|---|
| KV | 27,000 rpm/V (0702SE II; also 0702SE II 23000KV and 0702 II 30000KV) | BetaFPV product page |
| Stator | 7 × 2 mm (0702) (from the size in BetaFPV's name) | BetaFPV product page |
| Battery | 1S LiPo | BetaFPV product page |
| Weight | 1.47 g (0702SE II 27000KV with its 35 mm lead and plug; 1.45 g for the 23000KV, 1.55 g for the 0702 II. BetaFPV gives 1.40 g for the 27000KV with a 25 mm lead.) | BetaFPV product page |
| Dimensions | φ9 × 12.75 mm (with shaft); body 8.55 mm tall | BetaFPV 0702SE II sheet |
| Shaft | 1 mm, protrudes 4.2 mm | BetaFPV product page |
| Mounting | 3 × M1.4 holes, evenly spaced on a 6.6 mm circle | BetaFPV product page |
| Magnets | tile-shaped | BetaFPV product page |
| Bearings | brass bushings (0702SE II); dual ball bearings (0702 II) | BetaFPV product page |
| Peak current | 5.2 A (100% throttle, GF 1219S, 4 V; 4.19 A for the 23000KV, 5.15 A for the 0702 II 30000KV) | BetaFPV 0702SE II sheet |
| Max power | 20.8 W (16.76 W for the 23000KV, 20.6 W for the 0702 II 30000KV) | BetaFPV 0702SE II sheet |
| Leads | 30 AWG, 35 mm including the JST 1.25 mm 3-pin plug | BetaFPV product page |
| In the box | 4 motors, 15 × M1.4×3 PEEK screws, 12 × M1.4×3 metal screws | BetaFPV product page |
Bench data
Redrawn from BetaFPV’s test reports. Thrust is static pull on a bench, more than you get in flight. Power is volts × amps; efficiency is thrust divided by power.
23000KV on 1S, 4 V1 prop
| Prop | Throttle | Current (A) | Thrust (g) | Efficiency (g/W) | Power (W) |
|---|---|---|---|---|---|
| GF 1219S-3P (Gemfan 1219S, 3-blade) | 10% | 0.15 | 0.55 | 0.92 | 0.6 |
| 20% | 0.57 | 2.7 | 1.18 | 2.28 | |
| 30% | 1.01 | 5.48 | 1.36 | 4.04 | |
| 40% | 1.42 | 8.93 | 1.57 | 5.68 | |
| 50% | 1.83 | 12.3 | 1.68 | 7.32 | |
| 60% | 2.3 | 16.08 | 1.75 | 9.2 | |
| 70% | 2.67 | 20.56 | 1.93 | 10.68 | |
| 80% | 3.12 | 24.5 | 1.96 | 12.48 | |
| 90% | 3.49 | 27.5 | 1.97 | 13.96 | |
| 100% | 4.19 | 32 | 1.91 | 16.76 |
Source: BetaFPV 0702SE II sheet
27000KV on 1S, 4 V1 prop
| Prop | Throttle | Current (A) | Thrust (g) | Efficiency (g/W) | Power (W) |
|---|---|---|---|---|---|
| GF 1219S-3P (Gemfan 1219S, 3-blade) | 10% | 0.22 | 0.7 | 0.8 | 0.88 |
| 20% | 0.77 | 2.76 | 0.9 | 3.08 | |
| 30% | 1.39 | 5.94 | 1.07 | 5.56 | |
| 40% | 1.92 | 9.65 | 1.26 | 7.68 | |
| 50% | 2.42 | 13.69 | 1.41 | 9.68 | |
| 60% | 2.9 | 18.35 | 1.58 | 11.6 | |
| 70% | 3.34 | 22.4 | 1.68 | 13.36 | |
| 80% | 3.86 | 26.9 | 1.74 | 15.44 | |
| 90% | 4.32 | 30.92 | 1.79 | 17.28 | |
| 100% | 5.2 | 35.4 | 1.7 | 20.8 |
Source: BetaFPV 0702SE II sheet
30000KV on 1S, 4 V1 prop
| Prop | Throttle | Current (A) | Thrust (g) | Efficiency (g/W) | Power (W) |
|---|---|---|---|---|---|
| GF 1219S-3P (Gemfan 1219S, 3-blade) | 10% | 0.22 | 0.71 | 0.81 | 0.88 |
| 20% | 0.76 | 2.91 | 0.96 | 3.04 | |
| 30% | 1.37 | 6.5 | 1.19 | 5.48 | |
| 40% | 1.9 | 10 | 1.32 | 7.6 | |
| 50% | 2.47 | 14.36 | 1.45 | 9.88 | |
| 60% | 2.87 | 18.75 | 1.63 | 11.48 | |
| 70% | 3.3 | 24 | 1.82 | 13.2 | |
| 80% | 3.8 | 28.6 | 1.88 | 15.2 | |
| 90% | 4.23 | 32.4 | 1.91 | 16.92 | |
| 100% | 5.15 | 37.2 | 1.81 | 20.6 |
Source: BetaFPV 0702 II sheet
Inside the motor
A brushless outrunner: the coils stand still in the middle and the magnets spin around them. From the top down:
- Bell. Polished silver with an ice-blue top and base on the 0702SE II; black with a red top on the 0702 II. (BetaFPV product photo)
- Magnets. Tile-shaped magnets in a reworked magnetic circuit, with a higher coil fill than the first 0702. (BetaFPV product page)
- Bearings. Brass bushings on the 0702SE II, dual ball bearings on the 0702 II. (BetaFPV product page)
- Leads. 30 AWG, 35 mm including the JST 1.25 mm three-pin plug. (BetaFPV product page)
How fast it spins
KV is the motor’s no-load speed per volt. With nothing on the shaft, the 27000KV version reaches about these speeds; a prop loads the motor and brings it down, typically to around 70–75% of these figures at full throttle.
| Battery | Volts | No-load rpm (KV × V) | Electrical frequency | ESC steps per second |
|---|---|---|---|---|
| 4S nominal | 14.8 | 399,600 | 39,960 Hz | 239,760 |
| 4S full | 16.8 | 453,600 | 45,360 Hz | 272,160 |
| 6S nominal | 22.2 | 599,400 | 59,940 Hz | 359,640 |
| 6S full | 25.2 | 680,400 | 68,040 Hz | 408,240 |
A 12-pole rotor has 6 pole pairs, so every turn of the shaft is 6 electrical cycles, and a six-step ESC switches the phases 36 times per turn.
About the 3D model
A generic outrunner drawn from BetaFPV’s published sizes: the 7 × 2 mm stator, 9 mm bell, 8.55 mm height, 1 mm shaft and 6.6 mm mounting circle. Anything BetaFPV doesn’t publish is typical for a motor this size, and the bell’s spoked top, the base and the inside are a generic design, not this motor’s. The colours are read off the maker’s product photos. There are no logos or markings: it is our drawing, not the maker’s.
Sources
- BETAFPV: 0702 II Brushless Motors (product page, with the 0702 II / 0702SE II comparison table). Retrieved Oct 19, 2026.
- BETAFPV: 0702 II 30000KV outline drawing and load performance table (image on the product page). Its model cell reads "0702SE II 30000KV"; the sheet's header and the 37.2 g in the product page's comparison table make it the 0702 II 30000KV. Speed and coil temperature columns are blank and left out.. Retrieved Oct 19, 2026.
- BETAFPV: 0702SE II 23000KV / 27000KV outline drawing and load performance tables (image on the product page). Speed and coil temperature columns are blank and left out.. Retrieved Oct 19, 2026.
- BETAFPV: 0702SE II 27000KV product photo, used for finish and spoke count. Retrieved Oct 19, 2026.