7-inch long-range FPV motor
Axisflying AZ2807
A 2807 for 6–7-inch long range, heavy lift and cinematic builds: 54.5 g with wire, and 2393 g at full throttle on a 7050 prop at about 24 V.
- 6–7-inch long range and cinematic
- 4S–6S
- 7-inch props
The spin is an illustration: the model turns at 1/600 of the no-load speed, and it is a generic 2807 motor drawn from Axisflying’s published sizes, not its exact design. Thrust, current and power are Axisflying’s bench figures for the 7050 prop at 25.01 V, read straight across between its throttle steps. Its data starts at 20% throttle.
- Max thrust
- 2,393 g
- 7050 prop, 25.01 V
- Weight
- 54.5 g
- with wire
- Peak current
- 42.9 A
- full throttle
- Max power
- 1,049 W
- full throttle
from $16.90a motor at Axisflying
A set of four: $67.60
Price seen Oct 19, 2026. Plain links: we earn nothing from them.
What it pulls
Axisflying’s own bench test, one line per prop. Drag across the chart to move the throttle; the model above follows.
At 60% with the 7050: 1,267 g of thrust, 14.1 A, 349 W, 3.60 g per watt.
On your quad
14.7 : 1
Thrust to weight at full throttle: four motors pull 9,572 g with the 7050 at 25.01 V.
At 60% throttle they pull 5,068 g, 7.8 times the quad’s weight.
All-up weight is the quad ready to fly, with its battery and camera. The thrust is the maker’s static bench figure; in the air it is lower.
What you get for $16.90
Long range and heavy lift
Axisflying sells the AZ2807 for 6–7-inch long-range, heavy-lift and cinematic drones and says its speed range suits 7-inch props.
Customizable KV
The store sells the 1350KV; Axisflying marks the KV as customizable.
Source: Axisflying spec image
Bench numbers
On a 7050 prop at about 24 V: 941 g at 8.98 A at half throttle, and 2393 g at 42.93 A and 1049.2 W at full throttle.
Source: Axisflying test data
What to pair it with
Our reading of Axisflying’s numbers, so your build matches what the motor was tested with.
- ESC
- 42.93 A at full throttle on Axisflying's 7050 bench at about 24 V. (Axisflying test data)
- Props
- A 7050, Axisflying's test prop; the page says the motor suits 7-inch props. (Axisflying test data, Axisflying feature image)
- Battery
- 4S–6S by the page title; the bench data is at about 24 V (6S). (Axisflying product page, Axisflying test data)
- Frame
- Four M3 screws on a 19 mm circle; the holes are threaded through the base. (Axisflying drawing)
Where to buy
- Axisflyingthe maker's store; also sold as a set of four for $64.90$16.90seen Oct 19, 2026Visit
Plain links, not affiliate links. Prices change; the store’s page has the current one.
Full specs
| Spec | Value | Source |
|---|---|---|
| KV | 1,350 rpm/V (Axisflying marks the KV as customizable; its store sells the 1350KV only) | Axisflying spec image |
| Stator | 28 × 7 mm (2807) (from the size in Axisflying's name) | Axisflying product page |
| Configuration | 12N14P (12 stator slots, 14 magnet poles) | Axisflying spec image |
| Battery | 4S–6S LiPo (from the page title; the spec image's operating voltage, 24.44 V, is the voltage of its full-throttle test row) | Axisflying product page |
| Weight | 54.5 g (with wire) | Axisflying spec image |
| Dimensions | φ33.4 × 36.25 mm; 20.45 mm without the shaft | Axisflying drawing, Axisflying spec image |
| Shaft | 5 mm, M5×0.8 thread (8.5 mm of thread), 16 mm long above the motor | Axisflying drawing |
| Mounting | 4 × M3 threaded through, on a 19 mm circle | Axisflying drawing |
| Internal resistance | 70 mΩ | Axisflying spec image |
| No-load current | 1.25 A (given as at most 1.25 A, with no test voltage) | Axisflying spec image |
| Max current | 42.93 A (the full-throttle row on a 7050 prop at 24.44 V (S4)) | Axisflying spec image |
| Max power | 1,049.2 W (the full-throttle row on a 7050 prop (S4)) | Axisflying spec image |
| Leads | 18 AWG silicone, 300 mm | Axisflying spec image |
| In the box | 1 motor, 6 screws, 1 flanged lock nut, 1 washer, 1 O-ring (as pictured on the packing list; sizes not given) | Axisflying packing list |
Bench data
Redrawn from Axisflying’s test reports. Thrust is static pull on a bench, more than you get in flight. Power is volts × amps; efficiency is thrust divided by power.
1350KV on 4S–6S, 25.01 V1 prop
| Prop | Throttle | Voltage (V) | Current (A) | Thrust (g) | RPM | Power (W) | Efficiency (g/W) |
|---|---|---|---|---|---|---|---|
| 7050 | 20% | 25.01 | 1.76 | 277 | 7771 | 44 | 6.3 |
| 30% | 24.99 | 3.54 | 485 | 10110 | 88.5 | 5.5 | |
| 40% | 24.95 | 5.56 | 681 | 11857 | 138.7 | 4.9 | |
| 50% | 24.9 | 8.98 | 941 | 13979 | 223.6 | 4.2 | |
| 60% | 24.83 | 14.05 | 1,267 | 16106 | 348.9 | 3.6 | |
| 70% | 24.74 | 21.08 | 1,601 | 17955 | 521.5 | 3.1 | |
| 80% | 24.64 | 28.72 | 1,958 | 19586 | 707.7 | 2.8 | |
| 90% | 24.51 | 37.87 | 2,262 | 20769 | 928.2 | 2.4 | |
| 100% | 24.44 | 42.93 | 2,393 | 21331 | 1049.2 | 2.3 |
Source: Axisflying test data
Inside the motor
A brushless outrunner: the coils stand still in the middle and the magnets spin around them. From the top down:
- Bell. Black, with a spoked top. (Axisflying product photo)
- Shaft. 5 mm with an M5×0.8 thread, 8.5 mm of it threaded, standing 16 mm above the motor. (Axisflying drawing)
- Stator. 28 × 7 mm, 12 slots, with 14 magnet poles in the bell. (Axisflying product page, Axisflying spec image)
- Leads. 18 AWG silicone wire, 300 mm. (Axisflying spec image)
How fast it spins
KV is the motor’s no-load speed per volt. With nothing on the shaft, the 1350KV version reaches about these speeds; a prop loads the motor and brings it down, typically to around 70–75% of these figures at full throttle.
| Battery | Volts | No-load rpm (KV × V) | Electrical frequency | ESC steps per second |
|---|---|---|---|---|
| 4S nominal | 14.8 | 19,980 | 2,331 Hz | 13,986 |
| 4S full | 16.8 | 22,680 | 2,646 Hz | 15,876 |
| 6S nominal | 22.2 | 29,970 | 3,497 Hz | 20,979 |
| 6S full | 25.2 | 34,020 | 3,969 Hz | 23,814 |
A 14-pole rotor has 7 pole pairs, so every turn of the shaft is 7 electrical cycles, and a six-step ESC switches the phases 42 times per turn.
About the 3D model
A generic outrunner drawn from Axisflying’s published sizes: the 28 × 7 mm stator, 33.4 mm bell, 20.45 mm height, 5 mm shaft, 19 mm mounting circle and 12 teeth and 14 magnets. Anything Axisflying doesn’t publish is typical for a motor this size, and the bell’s spoked top, the base and the inside are a generic design, not this motor’s. The colours are read off the maker’s product photos. There are no logos or markings: it is our drawing, not the maker’s.
Sources
- Axisflying: Motors AZ2807 6s (product page). Retrieved Oct 19, 2026.
- Axisflying: AZ2807 engineering drawing, labelled AZ2807-V1 (image on the product page). Retrieved Oct 19, 2026.
- Axisflying: AZ2807 basic data (spec image on the product page). Retrieved Oct 19, 2026.
- Axisflying: AZ2807 1350KV test data on a 7050 prop, 1–5 kg dynamometer (image on the product page). Each row's voltage is as measured; the table's voltage is its 20% row. The PWM column (1200–2000 µs) is left out; it repeats the throttle steps.. Retrieved Oct 19, 2026.
- Axisflying: AZ2807 feature image ('Multi-speed RPM adapts to 7 inch FPV', on the product page). Retrieved Oct 19, 2026.
- Axisflying: AZ2807 packing list (image on the product page). Retrieved Oct 19, 2026.
- Axisflying: AZ2807 1350KV main product photo, used for finish. Retrieved Oct 19, 2026.
